Quick Start Guide

Login
Network Configuration
5
6
10:29:10
Usename and password
admin
••••••
Cancel
OK
Menu
SD Card Status
Wired Network
Connection Status
Local Network Configuration
Sever Configuration
Local Network Config
IPv4
IPv6
Obtaining IP address
automatically
Input IP address
manually
IP address
Subnet mask
Gateway
First DNS server
Second DNS server
192.168.1.88
192.168.1. 1
192.168.1. 1
255.255.0. 0
8 . 8 . 8 . 8
Please set IPv4 or IPv6 as needed. Here
taking IPv4 network settings for example.
You can enter IP address, subnet mask,
gateway and DNS server manually or get
these network parameters by selecting
obtaining IP address automatically.
After that, tap to save the settings.
Note: If you want to obtain IP address
automatically, you shall enable DHCP
function in the router.
Enter the IP address of the transfer server
of the client software
Enter the device ID allocated in the
client software
Enter auto report port of the client software
Group Settings
Sever port
Sever address
. . .
2009
People Management
People Management
Name ID No. Group Verification
XXX 123 Allow List Face only
Search name or ID number
Name ID no. Group Verification
XXX 123 Allow List Face only
Add User
Name*
ID no.
Gender*
Age
Card no.
Password
Remark
Group type*
Verification*
Face*
Pls select group type
Pls input password
Face only
Match Settings
Group Settings
In the face config page, tap “Match Settings” to
go to the match settings page.
Please set similarity threshold, deduplication
period, snapshot interval, white light mode and
so on as needed.
Deduplication period: In the pre-defined period,
delete repeated comparison results.
It is recommended to use the default match
settings.
In the face config page, tap “Group Settings” to
go to the group settings page.
There are three groups– allow list, block list,
visitor.
The group type of the added user can be
changed here.
Select a group and tap “ ” to enter this group.
Tap the user you want to change his/her
group and then a drop-down list will be
displayed. Choose the group to change.
Adding Face：
Face the camera and ensure your face picture in
the middle of the face collecting window. Keep
your expression naturally when collecting face
pictures.
Do not wear hat, sunglasses, or other objects
that can affect the face recognition function.
Do not make your hair cover your eyes, ears, etc.
The ideal recognition distance is from 0.5 to
1m; when collecting or comparing face picture,
please ensure that the target is in a proper position.
Face Configuration
7
4
Installation
1
3
4
5
6
8
32.0
Ø33.5
Enable
Device ID
1
Allow List
Block List
Visitor
Web Client Access
8
Main Menu
Face Config
11:10:05
Cut the hole on the installation
surface according to the drill
template.
Pole Mounting
Note: Pole mounting bracket is not supplied with the
device by default. It needs an additional purchase.
Install the pole and then
tighten the nut.
2
Installation
Surface
Nut
Route the cables.
Tighten the screw with a
L-shaped screwdriver.
Connect the cables.
Fasten the device and the
bracket with four screws.
Loosen the screws to adjust
the angle of the device.
Screw
Unlocking
by Password
After the device is powered on and connected to the LAN, you will see the
following interface.
Tap the menu button to pop up a
login box. Enter the username and
password and tap “OK” to enter
the main menu page.
The default username: admin
The default password: 123456
Data Record
Device
Maintenance
System Settings Network Config
Access Control
Settings
In the main menu page, tap “Network Config” to go to the network configuration
interface.
Sever Config
Click it to modify the server port
Click it to enter the IP address
Click it to modify the device ID
This function is mainly used for connecting
client software.
Note: The auto report shall be enabled when
you add this device in the client software.
① Make sure that the device and the PC are well connected via LAN.
② Find the IP-Tool from the CD and then install it in the computer. After that, run the
IP-Tool as shown below.
Device Network Search
Immediate Refresh
name
name
name
IPC
IPC
IPC
unkno wn
unkno wn
unkno wn
192.1 68.226.201
192.1 68.1.2
192.1 68.1.3
80
80
80
9008
9008
9008
255.2 55.
255.2 55.
255.2 55.
Modif y Network Para meter
Mac Addr ess
IP Address
Modif y
CE :98 :2 3 :75 :35 :22
192 . 168 . 226 . 201
255 . 255 . 2 55 . 0
192 . 168 . 226 . 1
i
Tip: Enter the a dministrat or password, and
then mo dify the netwo rk parameter s.
Total Dev ice: 3 Local I P Address :192.168.1. 4
Subne t Mask:255.255.255. 0 Gatew ay: 192.168.1.1 DNS：210 . 21. 196 . 6
Devic e Name Device Type IP Address Http Po rt Data Po rt
Subne t
Produ ct Model
About
Subne t Mask
Gatew ay
Restore IPC Default Configuration
③ Modify the IP address. The default IP address of this terminal is
192.168.226.201. Click the information of the device listed in the above
table to show the network information on the right hand.
Modify the IP address and gateway of the camera and make sure its network
address is in the same local network segment as that of the computer. Please
modify the IP address of your device according to the practical situation.
After modification, please enter the password of the administrator and click
“Modify” button to modify the settings.
The default password of the administrator is “123456”.
④ Double-click the device listed in the IP-Tool or manually enter the IP
address in the address bar of the web browser to connect the device.
Then follow directions to download and install the plugin.
⑤ Enter the username and password in the login interface.
The default username is admin; the default password is 123456.
Pls input remark
Pls input Card number
Pls input name
Pls input ID number
Pls select the gender
① Select “People Management” in the main
menu page to go to the people management page.
② Tap “+” to enter the “Add User” page.
③ Set username, gender, group type,
ID number, verification mode, etc.
④ Tap to add a face picture. The
detailed face adding requirements refer
to the descriptions of Adding Face .
⑤ Tap to save settings.
Block List
Visitor
Allow List
Allow List
Good
Good
Tilt
Too Close
Side
Too Far
Raise
Bow
Head Position
Face Distance
Face Detection Direction
Screw (KM3*9)x4
Screwdriver
Drill Template
Bracket
Package
4 Screws
(KM3*9)
Tel
Pls input age
Pls input tel
Registering
Match Settings
75%
4S
4000MS
Similarity threshold
Deduplication period
Snapshot interval
Send the face comparison
Save face comparison data
Liveness detection
White light mode
Auto
296.3mm
316.3mm
Ø55
-25°~25°