User Manual

INSTALLATION 2 - 12 Manual 0-2529
2.8 LIFTING THE POWER SUPPLY
Figure 2-H Lifting the Power Supply
WARNING Do not lift the power supply by the handles.
CAUTION
Do not lift a power supply equipped with a cylinder rack
running gear.
The recommended method for lifting the power supply is
to use a forklift (see Figure 2-H). Approach from the front
or rear of the unit. Place the forks between the rear wheels
or the front casters. Center the forks under the unit and
carefully check for proper balance before lifting.
Approach From Front Or Rear
Do Not Lift From Sides
A-00873