181i Fabricator User Manual

Fabricator 181i
INSTALLATION, OPERATION AND SETUP 3-26 Manual 0-5191
Art #
A-10364
Work lead
MIG Gun
polarity lead
not connected.
Note: A Tweco 17V TIG torch with
an 8 pin plug must be used to turn the
weld current on/o via the TIG torch trigger
switch to TIG weld OR a Tweco Foot
Control with an 8 pin plug must be used to
turn the weld current on/o as well as
providing remote control of the weld current.
TIG Torch
Connect to shielding gas
regulator/ow gauge.
Secure the gas cylinder
in an upright position by
chaining it to a stationary
support to prevent falling
or tipping.
Negative welding
terminal (- ).
Positive welding
terminal
(
+
)
.
Figure 3-18: Setup for TIG Welding