Instructions / Assembly

TROUBLESHOOTING
Problem Recommended Solutions
TweeBot will
not pair to my
mobile device
The battery might be too low and needs
charging. Plug-in TweeBot and retry.
Remove TweeBot from your Bluetooth
connected devices and try the command
“Pair Mode” to connect again.
There is a built-in time delay when phone
commands like, Hey Siri , OK Google or
other mobile voice commands are issued.
Wait for voice control to return to TweeBot .
Listen for the two-beep signal that signifies
TweeBot is ready to accept a command.
Sometimes music, podcasts or a 3rd party
program will be stuck and voice command
will not return to TweeBot . Reboot
TweeBot or your mobile device to return to
normal voice command mode.
The battery may be too low and needs
charging. Plug-in TweeBot and retry.
There are multiple volume controls for
various mobile phones where adjustments
can be made. Check ringer volume,
notification signal volume, and Bluetooth
volume on your mobile device.
Adjust volume to your desired level on both
the TweeBot and your mobile phone.
32
The volume is
too low during a
phone call–
I cannot hear
my caller or they
cannot hear me
TweeBot is not
responding to
“Hello Tweebaa”
7
b. Alternatively, you can press the Bluetooth icon button
(hold for few seconds) until the status light is blinking
blue/red. This goes directly into pair mode.
Check you phone and search for the Bluetooth device
named “TweeBot ” and select it.
Once Tweebot is connected with your smartphone, it
will say “Your phone is connected”
iOS