Dimensions Guide

186-8120, No. 2 Road, Suite 238 · Richmond, BC · Canada · V7C 5J8
[phone] · [phone] · [e-mail] · www.twicebright.com
Twice Bright Lighting Co. Ltd.
CL1220TI - 3” ICAT Low Voltage Downlight
Product Specications:
Lamp - One 12V 20W Aluminum backed MR16 or appropriate
LED (not included)
Reccomended Lamps - Philips Energy Advantage 20W IR
Toshiba 300 Series 6.7W LED
Socket - Ceramic bi-pin GX5.3
Thermal Protection - Thermally protected for over-lamping
Transformer - Electronic transformer model WTN20-1. Input
120VAC 60Hz. Maximum 20W. Surge protection.
Overload & short ciruit protection. High temper-
ature protection.
Dimming - Can be used with all dimmers designed for use with
electronic transformers. LED dimming dependent on
lamp.
Junction Box - Constructed of re-rated plastic. Maximum 2 No.
12 AWG 90°C cables (1 in, 1 out). Armoured Cable
adaptor included. 5 wire cable connection terminal.
Approved for feed-through wiring. Double
insulated xture, no grounding required.
Housing - IC rated. Air Tight as per ASTM E283 Standard.
Adjustible buttery clips for ceiling material thicknesses
of ¼” to 1 ¼” . Powder coated steel construction.
Approved for use in damp locations.
Trim - Round. Gimbal trim (35°). Finishes available: White (WH),
Chrome (CH), Brushed Steel (BS), Bronze (BZ), Black (BL).
Powder Coated. Lamp secured with wire retaining clip.
Cut Out Hole Diameter - 3” (76mm)
Project:
Product Code: (Please circle desired nish)
CL1220TI - WH CH BS BZ BL
9 ⅝” (244mm)
8 ¾” (222mm)
6 ¾” (172mm)
4 ⅝” (116mm)
5 ½” (141mm)
2 ½” (64mm)
2 ½” (64mm)
3 ½” (89mm)