Dimensions Guide

108 - 11860 Hammersmith Way · Richmond, BC · Canada · V7A 5G1
[phone] · [phone] · [e-mail] · www.twicebright.com
Twice Bright Lighting Co. Ltd.
CL1220TITL - 3” ICAT Low Voltage Downlight
Product Specications:
Lamp - One 12V 20W Aluminum backed MR16 or appropriate
LED (not included)
Reccomended Lamps - Philips Energy Advantage 20W IR
LED ≤10W
Socket - Ceramic bi-pin GX5.3
Thermal Protection - Thermally protected for over-lamping
Transformer - Electronic transformer. Input 120VAC 60Hz.
Maximum 20W. Soft start circuitry. Surge
protection. Overload & short ciruit protection.
High temperature protection.
Dimming - Can be used with all dimmers designed for use with
electronic transformers. LED dimming dependent on
lamp.
Junction Box - Constructed of re-rated plastic. Maximum 2 No.
12 AWG 90°C cables (1 in, 1 out). Armoured Cable
adaptor included. 5 wire cable connection terminal.
Approved for feed-through wiring. Double
insulated xture, no grounding required.
Housing - IC rated. Air Tight as per ASTM E283 Standard.
Adjustible buttery clips for ceiling material thicknesses
of ¼” to 1 ¼” . Powder coated steel construction.
Approved for use in damp locations.
Trim - Round. Gimbal trim (35°). Finishes available: White (WH),
Chrome (CH), Brushed Steel (BS), Bronze (BZ), Black (BL).
Powder Coated. Lamp secured with wire retaining clip.
Cut Out Hole Diameter - 3 ⅛” (78mm)
New Construction Mounting Plate - NCMP 3125
Project:
Product Code: (Please circle desired nish)
CL1220TI - WH CH BS BZ BL
9 ⅝” (244mm)
8 ¾” (222mm)
6 ¾” (172mm)
4 ⅝” (116mm)
5 ½” (141mm)
2 ½” (64mm)
2 ½” (64mm)
3 ¾” (95 mm)