User's Manual
Table Of Contents
- Table of Contents
- Copyright
- Regulatory Statement
- Package Contents
- Components
- Powering Up Your Notebook
- Installing the Battery
- Starting Your Notebook
- Using the Keyboard
- Using the Touch Pad
- Using the Memory Cards
- Using the Smart Card
- Using the Optical Disk Drive
- Connecting to a Wireless Local Area Network
- Connecting to a Bluetooth Device
- BIOS Setup Menu
- Starting the BIOS Setup Utility
- Navigating and Entering Information in BIOS
- Main Menu
- Advanced Menu
- Boot Menu
- Security Menu
- Save & Exit Menu
Getting Started
16
Charging the Battery
The Lithium-ion battery is not fully-charged upon purchase.
To charge the battery, follow the steps below:
1. Install the battery to your notebook. See procedures above.
2. Connect the AC adapter to the DC-in jack of your notebook.
3. Connect the AC adapter to the power cord.
4. Plug the power cord to an electrical outlet.
Charging Time
Battery pack type
Charging time
Standard
(Lithium polymer battery pack)
3.5 hours (system off); 5~6 hours (system on)
NOTE
The charging time may be longer if you are using your notebook while charging
the battery.
CAUTION
DO NOT charge the battery if the temperature is below 0ºC or higher than
45ºC.
Use only the supplied AC adapter. Using other AC adapters may damage the
battery or your notebook.
ATTENTION
NE PAS charger la batterie si la température est inférieure à 0 ° C ou
supérieures à 45 º C.
Utilisez uniquement l'adaptateur secteur fourni. L'utilisation d'autres
adaptateurs secteur peut endommager la batterie ou de votre tablette PC.
Checking the Battery Level
It is important that you monitor the battery status regularly to ensure you do not
run out of power at a critical moment.
To check the remaining battery power, click the battery icon in the system tray.