User's Manual Part 3

ManualsBrandsTwinhead International ManualsComputers & AccessoriesTablet Computer with 802.11b and Bluetooth

Appendix C — Installation of the Bluetooth

Choose a business card as needed-each time a remote device requests

your business card you must select a card from your PIM. If you ignore the

request the remote device will receive a timeout notice.

Always send the same business card-when this option is selected a

dialog appears that allows you to set a default business card, which will be

sent automatically when requests are received.

Where to store received business cards. The Received Business Cards

options are:

• Microsoft Outlook

• Outlook Express

• Lotus Notes

NOTE: The selected Received Business Cards option

does not influence the settings on other PIM-

related property pages.

For example, even if the PIM Item Transfer service

business card option on this computer is configured

to "Do Not Accept", the PIM Item Transfer

application will still accept business cards that

the application has specifically requested via its

"Receive" or "Exchange" functions.

Email attachments. The only option is include or do not include

attachments with email that is sent or received on this computer using this

service.

Summary of content (13 pages)

PAGE 1
Appendix C — Installation of the Bluetooth Choose a business card as needed-each time a remote device requests your business card you must select a card from your PIM. If you ignore the request the remote device will receive a timeout notice. Always send the same business card-when this option is selected a dialog appears that allows you to set a default business card, which will be sent automatically when requests are received. Where to store received business cards.
PAGE 2
Installation of the Bluetooth — PIM Synchronization setting PIM Synchronization setting Overview The PIM Synchronization Application is used to synchronize the Personal Information Manager (PIM) database of this computer with the PIM database of a remote Bluetooth device. The supported PIMs are: • Microsoft Outlook • Microsoft Outlook Express • Lotus Notes. The supported data types are: • Business cards • Calendar items • Email (with or without attachments) • Notes.
PAGE 3
Appendix C — Installation of the Bluetooth The data item types which can be synchronized are: • Business cards • Calendar items • Email (with or without attachments-see below) • Notes Possible synchronization options for each of these data item types include: Do Not Synchronize-this item type will not be synchronized Synchronize Microsoft Outlook-this item type will be synced with its matching entry in Microsoft Outlook, regardless of the PIM that contains this entry on the remote device.
PAGE 4
Installation of the Bluetooth — Serial port setting Serial port setting The Bluetooth Serial Port service allows two Bluetooth devices to establish a wireless connection through virtual communications ports and then use that connection as if it were a hardwired serial cable between the devices. To establish a Bluetooth serial port connection: Connections are initiated from the client: On the client, in the Folders pane of "My Bluetooth Places", select "Entire Bluetooth Neighborhood". 1.
PAGE 5
Appendix C — Installation of the Bluetooth * On the client, in the Folders pane of "My Bluetooth Places", select (highlight) the device that is providing the "Bluetooth Serial Port" service. * In the right pane of "My Bluetooth Places", right-click "Bluetooth Serial Port" and then select "Disconnect Bluetooth Serial Port" from the popup menu. Though not recommended, connections can also be closed from the server: * On the server, in the Folders pane of "My Bluetooth Places", select (highlight) "My Device".
PAGE 6
Installation of the Bluetooth — ActiveSync setting 3. In the Microsoft ActiveSync window, select Connection Settings... from drop-down list of File menu. 4. Choose the same COM port. (in this case, it is COM 6 that Bluetooth Serial port uses shown in the Step 2.) 5.
PAGE 7
Audio Gateway setting for windows The Audio Gateway Application allows a remote Bluetooth device to use this computer's microphone and speakers as the remote device's audio input and output devices. *Remember please switch your Audio device to "Bluetooth Audio" from control panel.
PAGE 8
Installation of the Bluetooth — Audio Gateway setting for windows From Bluetooth Explorer to connection your headset device. Key in headset pair key or PIN code. (Refer to the Headset's user's manual for reference) Close an audio gateway connection: If the connection was established via the Bluetooth icon in the Windows system tray; click the Bluetooth icon, select Quick Connect, Audio Gateway and then select the device that is providing the service (active connections have a checkmark in front of them).
PAGE 9
Appendix C — Installation of the Bluetooth • Enable or disable secure connection. To enable secure connection, place a checkmark in the box. Personal area network setting for windows The Personal Area Networking (PAN) chapter will show you how two or more Bluetooth enabled devices can form an ad-hoc network and how the same mechanism can be used to access a remote network through a network access point.
PAGE 10
Installation of the Bluetooth — Personal area network setting for windows How to setup an Ad-hoc Network 1. On the client, in the Folders pane of "My Bluetooth Places", select "Entire Bluetooth Neighborhood". 2. In the right pane of "Entire Bluetooth Neighborhood", right-click anywhere except on a device name and select Refresh from the pop-up menu. 3.
PAGE 11
Appendix C — Installation of the Bluetooth If the system pops up a "Bluetooth PIN Code Request" window please key in the same passkey or PIN code between the two devices. Once connected, you can check your Bluetooth PAN network neighborhood from the file explorer or by the "Search Computers" function.
PAGE 12
Installation of the Bluetooth — Personal area network setting for windows How to setup with Bluetooth Network Access Point The Bluetooth Software makes it easy to join an existing personal network, hosted by another Bluetooth device (PocketPC, desktop, etc.) From the My Bluetooth Places, choose Entire Bluetooth Neighborhood, and select the Bluetooth device that you want to establish a PAN connection and double click the device icon.
PAGE 13
Appendix C — Installation of the Bluetooth Right click the NAP Service and select "Connect to Network Access Point", your PC will get an IP address from the Network Access Point. At this moment, you might be prompted to enter the IP network settings; if this is the case, choose "Obtain an IP address automatically" from your Bluetooth Network TCP/IP setting. After selecting the host, a connection will then be established between your PC and the host over the personal network.