User Manual

To Remove the Battery Pack
Turn off the Sahara Slate PC and remove the power cord from the
“DC Power In”port. Turn over the computer and place it on a
solid, flat surface. Slide the Locking Tab in the direction of the
arrow engraved on the tab to set it in the unlock position. Use
your other hand to slide the battery latch in the direction of the
arrow engraved on the tab and hold it there. Use both hands to
carefully side the battery out of the bay.
Step 2: Connecting the Tablet PC to an external power source
Locate the AC Adapter and the power cord. Plug the power cord
securely into the AC adapter. Plug the AC adapter’s connection
cable into the “DC Power In” port on the top of the Tablet. Once
the adapter plug is securely in place, plug the power cord into an
external power socket.
Chapter 01: Getting Started 3
Inserting the battery
Removing the battery