User Manual

Appendix B — FAQ & Statement
62
shut down the computer by inserting a needle into the reset button
pinhole. (The reset button locates on the computer bottom side.)
Q: Why can’t I charge the battery of my portable computer after it
was out of use for some time?
A: After portable computers have not been used for a long time (more
than one month), the batteries will go into the low voltage
protection mode due to data back-ups and natural electrical
discharge. At that point, restoring normal voltage will require slow
charging over a period of several hours. Calibration can be
performed after the battery has returned to a normal condition.
Q: My computer alerts “CMOS Battery Low”, what can I do?
A: If you keep your computer in no power situation (unplug the
computer from the power outlet and remove battery at the same)
over 45 days, your data in CMOS will be lost.
Please reconfigure your CMOS by following steps:
1. Press DEL or F2 to enter the BIOS setup utility.
2. Select “Restore Defaults?” When you see the following
prompt, choose <Yes> and then press <Enter>.
Load Optimized Defaults?
[Yes] [No]
3. Select “Save Changes and Exit”. When you see the
following prompt, choose <Yes> and then press <Enter> to
restart your computer.
Save configuration and exit?
[Yes] [No]