User's Manual

Pairing to link

1. Setup Bluetooth link between transmitter and speaker

• Power on both transmitter and speaker

• The blue LED blinks at low speed (1Hz).

• For the first time use, stay pushing the pairing button of transmitter

and wait the LED1 of transmitter to blink at medium speed(2Hz).

• Then, devices are entered pairing status and setup link automatically.

• As the link is established, the LED1 on both devices are blinking at full

speed(4Hz).

• Plugging transmitter into the phone jack of any audio player and

enjoying the music from speaker

Note : F “Pairing to Link” is a general operation to create and exchange a

link key between two devices. The devices use the link key for

future authentication as exchanging information and, thus, setup a

link between them.

F The link will be always existed between these devices once you

set them up. You do not need to repeat the setup procedure in the

next time.

2. Setup Bluetooth link between speaker and computer (notebook, PDA, or

Mobile phone). The computer requires Bluetooth-enabled device and A2DP

technologies.

• Activate the Bluetooth application program in your computer.

• Search for the speaker device.

• Click link icon in the Bluetooth application program to link with

the speaker.

• If pairing code is required, key in “0000”.

• The link will be set and the LED1 of speaker will be blinking at full

speed(4Hz).

• Go to the device manager of the computer OS and redirect the

speaker device to the bluetooth speaker device. (For different

Bluetooth application program, there will be different bluetooth device

name.)

• Now, the music in your computer is played in the speaker.

Note : F For Bluetooth application program in your computer,

please consult your computer manual for Bluetooth operations.

F Please be aware the Bluetooth technology in your devices

should be version 1.2 and compatible with A2DP (Advanced Audio

Distribution Profile) to connect with speaker.