User Manual

Booming
TwinMOS
Page 25
• Realtek AES – Enable the AES Data Encryption. When the item is selected, you have to continue
setting the AES Key Length and the encryption keys.
Auth Algorithm
This setting has to be consistent with the wireless devices which the adapter intends to connect.
• Open System – No authentication is needed among the wireless devices.
• Shared Key – Only wirelss devices using a shared key (WEP Key, TKIP Key or AES Key identified)
are allowed to connecting each other. Setup the same key as the wireless devices which the adapter
intends to connect.
• Auto Switch – Auto switch the authentication algorithm depending on the wireless devices which the
adapter is connecting to.
Default Key ID
Select one of the keys (1~4) as the encryption key.
Key Length
You may select the 64-bit or 128-bit to encrypt transmitted data. Larger key length will provide higher
level of security, but the throughput will be lower.
Key1~Key4
The keys are used to encrypt data transmitted in the wireless network. Fill the text box by following the
rules below.
• 64-bit – Input 10 digit Hex values (in the “A-F”, “a-f” and “0-9”range) as the encryption keys. For
example: “0123456aef“.
• 128-bit – Input 26 digit Hex values (in the “A-F”, “a-f” and “0-9” range) as the encryption keys. For
example:“01234567890123456789abcdef“.