User's Manual

Netkey Series WLAN Card
WWW.TwinMOS.COM
Page 17
Available Network
This screen shows all Access Points or Adapters nearby when operating in Ad-Hoc mode. Click
“Refresh” button to collect the SSID and Strength information of all the wireless devices nearby. If you
want to connect to any device on the list, double-click the item on the list, and the adapter will
automatically connect to the selected device.
Signal Strength
This bar shows the signal strength level. The higher percentage shown in the bar, the more radio signal
been received by the adapter. This indicator helps to find the proper position of the wireless device for
quality network operation.
Signal Quality
This bar indicates the quality of the link. The higher the percentage, the better the quality.
General Connection Setting Table
Select the More Setting Page to access the Configuration menu, as shown below. You can make
changes to any of the fields shown below, without the need to restart your computer.
Network Type
The Netkey WLAN adapter can operate in one of two modes, which are specified in the Mode field of
the Configuration menu. Clicking the down arrow at the right of the Mode field displays the available
modes.
z Ad-Hoc - This is the 802.11b Ad-Hoc mode of operation. In “Ad-Hoc” mode, only one wireless
“ cell ” is supported for each different NETWORK NAME. All communication is done from