User Manual

ManualsBrandsTwo Brothers Racing ManualsFor the carHonda CRF230L/M

V.A.L.E.

V A R I A B L E A X I S L O C K I N G E X H A U S T

Parts List

IMPORTANT - PLEASE READ CAREFULLY

Warranty

Two Brothers Racing products are intended for closed course competition purposes only, and therefore are sold “as is”

without warranty. Two Brothers Racing specifically disclaims any warranties of merchantability or fitness for a particular

purpose and disclaims all responsibility for consequential and incidental damages or any other losses arising from the use

of these products or parts.

We recommend that this performance part be installed by a qualied motorcycle technician. If

you have any doubts as to your ability to install this performance part, please consult with your

local motorcycle dealer. Read all instructions rst before starting installation. Make sure the

motorcycle and exhaust system are completely cool before starting the installation. Also, make

sure the bike is secure on a centerstand or ideally a service lift during installation. Be sure to

save all stock components for possible use later.

Installation Instructions

1. Make sure the bike is completely cool before starting

the installation. Make sure the bike is secure on a

centerstand or ideally a service lift.

2. Remove right side panel.

3. Remove mufﬂer mount bolt, lower mid-pipe bolt and

mufﬂer clamp.

4. Remove right mufﬂer assembly.

5. Loosely attach mufﬂer to S-Bend using the four

6x14mm Socket Head Cap Screws and lock washers

provided. Slide barrel clamp over slip-tube joint.

6. Loosely attach mufﬂer assembly to motorcycle using

the supplied 8x70mm socket head bolt with 22mm

spacer at OEM mufﬂer mounting position.

7. Loosely attach mid-pipe section bolt using supplied

8x30mm socket head cap screw.

8. Tighten the mid-pipe, then the four V.A.L.E.™ring

mufﬂer bolts, barrel clamp, and lastly the mufﬂer

mount..

9. Install OEM side panel.

10. Double check to make sure that all hardware is

tightened.

11. Before you run the bike, clean off all ﬁngerprints

and dirt, as any oily residue will etch the metal and

become somewhat permanent when the system gets

hot. Run the bike and enjoy. It is normal for some

white smoke to appear the ﬁrst time you start the

bike. This is packing/manufacturing oil from inside

the pipe burning off. Check for gaps or leaks. If you

ﬁnd a leak, a little high temperature silicon sealant

should ﬁx it. After 50 to 100 miles, recheck all

fasteners for tightness.

2008-09 Honda

CRF 230L/M

Stainless Steel Slip-On Exhaust System with M-7 Canister

Part # 005-2760406V

Qty. Description Part Number

1 Mufﬂer Canister M-7 Aluminum 005-276-206M

1 Stainless Steel Slip On tube 005-27604S

1 HARDWARE KIT 005-276-3

2 X-Ring (half) 005-7-2-3

4 Split Lock Washer 005-WL6

4 6x14mm Socket Head Cap Screw 005-SH614

1 8x30mm Socket Head Cap Screw 005-SH830

1 8x70mm Socket Head Cap Screw 005-SH870

1 22mm Spacer 005-S-22A

1 57mm Barrel Clamp 005-27-57MSH

1 5mm Long Handle Ball end hex key 005-9-18610

1 T20 Torx Screw Hex Key 005-9-15820

1 TBR Sticker Kit 015-10212

1 Spark Arrestor (Installed) 005-106H

Summary of content (2 pages)

PAGE 1
Installation Instructions 1. Make sure the bike is completely cool before starting the installation. Make sure the bike is secure on a centerstand or ideally a service lift. 2. Remove right side panel. 3. Remove muffler mount bolt, lower mid-pipe bolt and muffler clamp. 6. Loosely attach muffler assembly to motorcycle using the supplied 8x70mm socket head bolt with 22mm spacer at OEM muffler mounting position. 7. Loosely attach mid-pipe section bolt using supplied 8x30mm socket head cap screw. 8.
PAGE 2
V.A.L.E. TM 2008-09 Honda V a r i a b l e A x i s L o c k i n g E x h a u s t CRF 230L/M Stainless Steel Slip-On Exhaust System with M-7 Canister Part # 005-2760406V 005-2760406V Care & Cleaning / Warranty Care & Cleaning Keep system free of dirt and moisture. Store in a cool, dry place. For cleaning use a mild spray cleaner. Always apply cleaner or polish with a soft, clean cloth.