Owner's manual

ITBR001-156
2006-09 Yamaha FJR1300 - 4
Figure DFigure E
ground wire
9 Route the ground wire to the right hand side of the throttle bodies.
10 Continue routing the ground wire under the frame cross member and above the
radiator.
11 Attach the ground wire from the Juice Box Pro to the negative side of the battery as
shown in Figure D.
12 Using the supplied velcro, secure the Juice Box Pro in the tool kit tray as shown in
Figure E.
Make sure to clean both surfaces with the alcohol swab before attaching.
13 Lower the fuel tank and verify the connectors and harness do not interfere with or
get pinched by the fuel tank.
14 Reinstall the main seat.
Note:It is recommended to disconnect the stock O2 sensor to get the full potential
out of the bike and the Juice Box Pro. Follow the wires coming out of your exhaust
and disconnect these wires where it goes into the main wiring harness.