Owner manual

ManualsBrandsTwo Brothers Racing ManualsCarYamaha R6

V.A.L.E.

V A R I A B L E A X I S L O C K I N G E X H A U S T

Parts List

IMPORTANT - PLEASE READ CAREFULLY

We recommend that this performance part be installed by a qualied

motorcycle technician. If you have any doubts as to your ability to

install this performance part, please consult with your local motorcycle

dealer. Read all instructions rst before starting installation. Make sure

the motorcycle and exhaust system are completely cool before starting

the installation. Also, make sure the bike is secure on a centerstand

or ideally a service lift during installation. Be sure to save all stock

components for possible use later.

Installation Instructions

1. Make sure the bike is completely cool before starting

the installation. Make sure the bike is secure on a

centerstand or ideally a service lift.

2. Remove lower right fairing from the motorcycle.

3. Remove mufﬂer inlet cover from front of mufﬂer to

expose exhaust valve cables (noise reduction valve).

4. Remove cables from mufﬂer and cable clamp from right

side rearset assembly.

5. Remove mufﬂer joint clamp and mufﬂer mounting bolt.

6. Remove mufﬂer assembly. Also be sure to remove the

OEM retaining ring and gasket from the stock slip tube.

7. Remove bracket holding the brake reservoir to the frame.

8. Remove the noise reduction valve servo bracket from the frame.

9. Remove servo by pulling out from the right side of the

motorcycle and disconnect the cables. Disregard cables.

10. Remount the servo without the cables. This step is

necessary in order to keep an error code from being

displayed on the LCD screen.

11. Reinstall the brake reservoir.

(Continued on Page 2)

Qty. Description Part Number

1 Yamaha R6 Mufﬂer Canister M-2 Varies

1 Yamaha R6 Slip-On Tube 005-14604S

1 Mufﬂer Clamp Varies

1 HARDWARE KIT 005-146-3

1 X-Lite™ V.A.L.E.™ Retaining Ring 005-7-2-2

1 Yamaha R6 Billet Mufﬂer Mounting Bracket 005-146B

1 8x16mm Flange Bolt 005-FB816

1 Barrel Clamp 005-27-61MSH

1 5mm Long Handle Ball end hex key 005-9-18610

4 6x14mm Socket Head Cap Screw 005-SH614

4 6mm Split Lock Washer 005-WL6

2006-10

Yamaha R6

V.A.L.E.™ Slip-on Exhaust System with M-2 Canister

Part # 005-1460406V / 005-1460407V / 005-1460408V

Summary of content (3 pages)

PAGE 1
Installation Instructions 1. Make sure the bike is completely cool before starting the installation. Make sure the bike is secure on a centerstand or ideally a service lift. 7. Remove bracket holding the brake reservoir to the frame. 2. Remove lower right fairing from the motorcycle. V.A.L.E. TM 2006-10 V a r i a b l e A x i s L o c k i n g E x h a u s t Yamaha R6 8. Remove the noise reduction valve servo bracket from the frame. V.A.L.E.
PAGE 2
Installation Instructions 16. Attach muffler assembly using OEM muffler mount bolt. Use supplied threadlock. Do not tighten yet. 22. Before you run the bike, clean off all fingerprints and dirt, as any oily residue will etch the metal and become somewhat permanent when the system gets hot. Run the bike and enjoy. It is normal for some white smoke to appear the first time you start the bike. This is packing/ manufacturing oil from inside the pipe burning off. Check for gaps or leaks.
PAGE 3
V.A.L.E. TM V a r i a b l e A x i s L o c k i n g E x h a u s t 2006-10 Yamaha R6 V.A.L.E.™ Slip-on Exhaust System with M-2 Canister Part # 005-1460406V / 005-1460407V / 005-1460408V 005-1460406V 005-1460407V 005-1460408V Qty. Description Part Number Qty. Description Part Number Qty. Description Part Number 1 Yamaha R6 Muffler Canister M-2 Aluminum 1 Yamaha R6 Slip-On Tube 1 Muffler Clamp 1 HARDWARE KIT 1 X-Lite™ V.A.L.E.