User guide

Parts List
IMPORTANT - PLEASE READ CAREFULLY
We recommend that this performance part be installed by a qualied motorcycle
technician. If you have any doubts as to your ability to install this performance
part, please consult with your local motorcycle dealer. Read all instructions
rst before starting installation. Make sure the motorcycle and exhaust system
are completely cool before starting the installation. Also, make sure the bike is
secure on a centerstand or ideally a service lift during installation. Be sure to
save all stock components for possible use later.
Installation Instructions
Yamaha R6
V.A.L.E.™ Complete Exhaust System with M-2 Canister
Part # 005-2120106V / 005-2120107V / 005-2120108V
Qty. Description Part Number
1 R6(08)MuferCanisterM-2 Varies
1 R6(08)Slip-OnTube 005-21201S
1 R6(07)Complete4-2-1HeaderAssy. 005-14601HK
1 MuferClamp Varies
1 HARDWAREKIT 005-212-3C
1 X-RingKit 005-7-2-3KIT
1 R6(08)BilletMountingBracket 005-212B
2 8mmFlangeNut 005-FN8
1 8x16mmFlangeBolt 005-FB816
1 66mmBarrelClamp 005-27-66MSH
1 PermatexUltraBlackGasketMaker 031-P22072
1. Makesurethebikeiscompletelycoolbeforestartingthe
installation.Makesurethebikeissecureonacenterstand
orideallyaservicelift.
2. Removelowerrightfairingfromthemotorcycle.
3. Removemuferinletcoverfromfrontofmuferto
exposeexhaustvalvecables(noisereductionvalve).
4. Removecablesfrommuferandcableclampfromright
siderearsetassembly.
5. Removemuferjointclampandmufermountingbolt.
6. Removemuferassembly.Alsobesuretoremovethe
OEMretainingringandgasketfromthestocksliptube.
7. Removebracketholdingthebrakereservoirtotheframe.
8. Removethenoisereductionvalveservobracketfromthe
frame.
9. Removeservobypullingoutfromtherightsideofthe
motorcycleanddisconnectthecables.Disregardcables.
10. Remounttheservowithoutthecables.Thisstepis
necessaryinordertokeepanerrorcodefrombeing
displayedontheLCDscreen.
11. Reinstallthebrakereservoir.
12. Removethestockheaderexhaustportnuts(8nutstotal)
inordertoremovethestockheaders.