Manual

Conﬁguring and using the TORPEDO Live

7 MIDI setup

The MIDI parameter can be found on the SETUP mode. The TORPEDO Live handles both preset change com-

mands (PROGRAM CHANGE or PC) and parameter change commands (CONTROL CHANGE or CC). This way,

you can interact with all the parameters on the machine from any kind of standard MIDI controller, like a MIDI

pedalboard or a keyboard.

1. Select if the machine is to receive to PROGRAM CHANGE and/or CONTROL CHANGE commands. For

example, if you plan to use the preset switching (PC), the CC receive can be Off.

2. Set a MIDI channel for the machine to receive. You can choose to receive all channels, which is useful

when you don’t know exactly on which channel the commands are sent.

3. With the MIDI monitor, check the correct reception of the commands by the TORPEDO textitLive.

8 Continuous save, preset save

The state of the machine is saved in real time, continuously, and is reloaded when you switch on the machine.

The parameters continuously saved are:

• the current preset,

• the modiﬁed preset if any (with all its parameters and name),

• the SETUP mode parameters,

• and the OUT LEVEL.

The navigation is not saved (for example if you were in a particular parameter menu). The purpose is to

reload the machine at its initial state, after a power outage on stage, for example.

When you edit a preset, a star can be seen after the preset number in PERFORM mode. It is possible to

navigate through the presets and to come back to the preset you are editing. This way, the modiﬁed and the

non-modiﬁed preset can be compared. If you edit a second preset, this will cancel the modiﬁcation on the ﬁrst

edited preset if it was not saved. It is only possible to edit one preset at a time.

Saving a preset can be done from any mode, by holding the HOLD TO SAVE/EDIT button. The saving process

is done in three steps:

1. "Rename & hold...": choose the preset name, use PARAM to change the character position and VALUE

change the character. Hold the button to go to the next step.

2. "Hold to save to:": Choose where you want to save the preset, the default slot is the current one. Hold the

button to go to the next step.

3. You will see on the screen "Saving, please wait..." for less than a second, the preset is now saved.

9 Want more cabinets ?

It is possible to add new cabinets or IRs ﬁles to your TORPEDO Live using the TORPEDO Remote software. Down-

load the software from the Two Notes website: http://www.two-notes.com. Take control of the machine through

USB, change the parameter, arrange or add/delete cabinets and IR ﬁles or apply updates. The TORPEDO Re-

mote detects any new update or new Two Notes cabinets (requires a working Internet connection).

The install process of the TORPEDO Remote creates two default folders where the Impulses are stored:

• "Program Files\Two Notes Audio Engineering\Impulses" on Windows™.

• "/Library/Application Support/Two Notes Audio Engineering/Impulses" on MAC™.

All the cabinets ﬁles have to be on this folder without any subfolders. The TORPEDO Remote automatically

saves the downloaded cabinets in this folder.

26 Two Notes Audio Engineering TORPEDO Live