Owner manual

Speciﬁcations

2.5 Technical data

Designation

Characteristics

Speaker Input

Jack 6.35mm (1/4") unbalanced (TS, Tip/Sleeve)

Maximum input voltage: 140 Volts AC (45 dBu)

Security load: 220 Ohms / 10 Watts

Loadbox

Reactive load, nominal impedance: 4 or 8 or 16 Ohms switchable

Maximum continuous admissible power: 150 W (assuming proper ventilation)

Maximum temporary admissible power : 200 W (assuming proper ventilation)

Speaker Output

2 X Jack 6.35 mm (1/4") unbalanced (TS)

Minimal load: 4 Ohms

Maximum output level:

• 29 dBu @ 16 Ohms

• 28.5 dBu @ 8 Ohms

• 27 dBu @ 4 Ohms

Maximum output power:

• 25 W RMS@ 16 Ohms

• 50 W RMS@ 8 Ohms

• 70 W RMS@ 4 Ohms

Loadbox Output

Balanced male XLR

Output Impedance: 600 Ohms

Ground/Lift switch

Attenuation (speaker input to balanced loadbox output): 24.5 dB

Maximum output level (balanced): 20.5 dBu

Noise: under -98 dBu from 20 Hz to 20 kHz

Frequency response @ -1dB: 5 Hz to 24 kHz

Two Notes Audio Engineering Torpedo Reload 47