Instruction Manual

Quick start guide
2 Front panel
1
2
3
4
5
5
6
7
8
9
Figure 3.1: Front view of the TORPEDO VB-101
1 Ventilation slit 4 Main screen 7 Output volume
2 Input gain 5 Menu switches 8 Phones output
3 Presets screen 6 Navigation switches 9 Mains switch
3 Rear panel
THRU INPUT
8 Ohms 150W RMS
POST SIMULATION PRE SIMULATION
LEFT RIGHT
S/PDIF AES/EBU
IN
IN
OUT
OUT
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK
DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOSTURE.
CAUTION
TO REDUCE THE RISK OF FIRE OR ELECTRIC SCHOCK
CAUTION
DO NOT REMOVE COVER.
!
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
AVIS : RISQUE DE CHOC ELECTRIQUE. NE PAS OUVRIR.
CAUTION
REPLACE FUSE WITH SAME FUSE TYPE AND RATING
POWER
ALWAYS CONNECT YOUR AMP
OUTPUT TO A SUITABLE LOAD.
DO NOT SET YOUR AMP MASTER
VOLUME TO MAX IN ORDER
TO AVOID POSSIBLE DAMAGES.
NOTICE
SERIAL NUMBER
MADE IN FRANCE
R o H S
2002/95/EC
ANALOG OUPUTS ANALOG INPUT
USB
WORDCLOCK
IN
SYNC
SPEAKER
DIGITAL I/0
OPTIONAL ETHERNET
AUDIO ENGINEERING
IN OUT/THRU
MIDI
1
2
2
3
4
5
7
8
9
12
14
15
13
11
10
6
Figure 3.2: Rear view of the TORPEDO VB-101
1 Mains power with fuse holder 4 Ethernet (optional) 7 USB 10 Analog Line Outputs (Bal.) 13 Speaker Output
2 Warning notices 5 Wordclock Input 8 S/PDIF In/Out 11 Pre-simulation Line Output (Bal.) 14 Amp Input
3 Serial number 6 MIDI In/Out/Thru 9 AES/EBU In/Out 12 Analog Line Input (Bal. or Unbal.) 15 Fan
4 Only a speaker simulator?
The TORPEDO VB-101 is a standalone unit you can bring with you in any situation, whenever silent
playing is needed.
The role of the TORPEDO VB-101 is to replace the following elements of the traditional guitar or
bass setup:
• the guitar/bass power amplifier
• the speaker cabinet
• the microphone
• the microphone preamplifier
in order to provide a signal that is the closest possible to a traditional guitar/bass miking in a pro-
fessional studio environment.
16 Two Notes Audio Engineering Torpedo VB-101