Instruction Manual

Quick start guide
THRU INPUT
8 Ohms 150W RMS
POST SIMULATION PRE SIMULATION
LEFT RIGHT
S/PDIF AES/EBU
IN
IN
OUT
OUT
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK
DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOSTURE.
CAUTION
TO REDUCE THE RISK OF FIRE OR ELECTRIC SCHOCK
CAUTION
DO NOT REMOVE COVER.
!
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
AVIS : RISQUE DE CHOC ELECTRIQUE. NE PAS OUVRIR.
CAUTION
REPLACE FUSE WITH SAME FUSE TYPE AND RATING
POWER
ALWAYS CONNECT YOUR AMP
OUTPUT TO A SUITABLE LOAD.
DO NOT SET YOUR AMP MASTER
VOLUME TO MAX IN ORDER
TO AVOID POSSIBLE DAMAGES.
NOTICE
SERIAL NUMBER
MADE IN FRANCE
R oH S
2002/95/EC
ANALOG OUPUTS ANALOG INPUT
USB
WORDCLOCK
IN
SYNC
SPEAKER
DIGITAL I/0
OPTIONAL ETHERNET
AUDIO ENGINEERING
IN OUT/THRU
MIDI
2
3
5
1
SPEAKER OUTPUT 8 OHMS
150W RMS max
O
I
4
1 Electric guitar or bass 3 TORPEDO VB-101, rear view 5 Headphones
2 Guitar or bass amplifier 4 TORPEDO VB-101, front view
In this first simple configuration, you will be creating a line-level professional "studio" quality output
for your amp, which will allow you to familiarize yourself with the machine within minutes.
First plug a cable (jack or speakon) into the 8-Ohm
Speaker Output of your amp.
Using an output with a rating other that 8 Ohms (e.g., 2, 4 or 16) may
cause significant damage to your amplifier, requiring service by a
technician.
Please use a standard speaker cable (a pair of insulated conductors
with no shielding). Using an instrument cable instead of a speaker ca-
ble can cause significant damage to your amplifier, requiring service
by a technician.
Two Notes Audio Engineering Torpedo VB-101 19