Product Manual
3
TWTG R&D B.V. 2019 V1.5
Product Warnings
English
• WARNING - DO NOT OPEN WHEN AN EXPLOSIVE ATMOSPHERE IS PRESENT
• WARNING - POTENTIAL ELECTROSTATIC CHARGING HAZARD - SEE INSTRUCTIONS
•
• This product shall only be opened by competent and trained technicians. Thus, batteries shall only be
replaced by competent, trained and appointed technicians. Please contact the manufacturer.
• There are no user-serviceable parts within the device.
• The device enclosure shall be cleaned only by the use of a water-damped cloth. The use of dry cloths and /
or chemical agents shall be prohibited.
• If damage to the enclosure is noticed, the discoverer shall immediately inform a competent and trained
person, who shall remove the device from service as soon as possible, and return to the manufacturer.
• This equipment is only intended for use in restricted access areas.
• If the device doesn’t function as documented, remove the product from the IECex / ATEX environment and
dispose accordingly by returning it to the manufacturer.
• If a device is no longer connecting with gateways, it shall be returned to the manufacturer for examination.
• If a device is in contact with chemical materials please clean it appropriately
French
• WARNING - DO NOT OPEN WHEN AN EXPLOSIVE ATMOSPHERE IS PRESENT
• WARNING - POTENTIAL ELECTROSTATIC CHARGING HAZARD - SEE INSTRUCTIONS
•
• This product shall only be opened by competent and trained technicians. Thus, batteries shall only be
replaced by competent, trained and appointed technicians. Please contact the manufacturer.
• There are no user-serviceable parts within the device.
• The device enclosure shall be cleaned only by the use of a water-damped cloth. The use of dry cloths and /
or chemical agents shall be prohibited.
• If damage to the enclosure is noticed, the discoverer shall immediately inform a competent and trained
person, who shall remove the device from service as soon as possible, and return to the manufacturer.
• This equipment is only intended for use in restricted access areas.
• If the device doesn’t function as documented, remove the product from the IECex / ATEX environment and
dispose accordingly by returning it to the manufacturer.
• If a device is no longer connecting with gateways, it shall be returned to the manufacturer for examination.
• If a device is in contact with chemical materials please clean it appropriately
Installation
• Installation needs to be performed according to IEC 60079-14
• Installation shall only be carried out by trained and authorized personnel.
• Installation only as instructed in this installation manual
The device works with LoRa WAN connectivity, a LoRa WAN network must be present for the sensor to
operate.
For full specifications and installation manuals please visit: www.twtg.io/temperaturesensor