User's Manual

Chapter 2: Setting Up 21
2.2 Installing Motherboard Components
This section describes how to install components on to the
motherboard, including CPUs, memory modules and expan-
sion cards.
2.2.1 Removing the Chassis Cover
Follow these instructions to remove the Transport FT48-
B4985 chassis cover. This step is required before any other
procedures in this chapter can be undertaken.
1. If the chassis lid is secured with two screws from the rear
of the unit, remove them first. See “System Rear View”
on page 9 for the screw locations.
2. Press the button on the release catch and lift the catch.
Slide the chassis lid back slightly.
3. Lift the lid free from the chassis.
Follow the steps above in reverse to refit the chassis cover.