Cut Sheet
1223
Dimensions are shown for
reference purposes only.
Dimensions are in inches over
(millimeters) unless otherwise
specified.
Specifications and availability
subject to change.
www.tycoelectronics.com
Technical support:
Refer to inside back cover.
P&B
Catalog 1308242
Issued 3-03
External Resistor Selection Chart
See External Resistor Selection Charts at beginning of Time Delay Relay section of this Databook.
Wiring Diagrams – Bottom Views (pins numbered clockwise from keyway)
* If control input is applied when supply input is applied, relay will immediately energize. A 50 millisecond minimum control pulse is required.
** Note Input polarity for DC operation. For most reliable operation on AC, connect high side to “+” and low side to “–”.
+
_
INPUT
(DC POLARITY INDICATED)**
Fig. 1
8 Pin
EXTERNAL RESISTOR
INPUT
(DC POLARITY INDICATED)**
Fig. 2
11 Pin
Fig. 3
11 Pin
INPUT
(DC POLARITY INDICATED)**
SUPPLY
CONTROL
INPUT*
+
_
+
_
+
_
➛
➛
➛
➛
➛
➛
➛
➛
➛
➛
➛
➛
Outline Dimensions
.60
(15.2)
.56
(14.2)
2.937 MAX.
(74.6)
2.406 MAX.
(61.1)
1.781 MAX.
(45.2)
➛
➛
➛
➛
➛
➛
➛
➛
Ordering Information – Authorized distributors are more likely to stock boldface items listed below.
Delay on Operate Models
Voltage Time Adjustment Wiring Dia. Part Number
0.1 to 1 Sec. CDB-38-70001
0.1 to 5 Sec. CDB-38-70002
120VAC 0.1 to 10 Sec. Knob 1 CDB-38-70003
0.3 to 30 Sec. CDB-38-70006
0.6 to 60 Sec. CDB-38-70004
1.8 to 180 Sec. CDB-38-70005
120VAC 1 Sec. Fixed CDA-38-70012
0.1 to 1 Sec. CDF-38-70001
120VAC 0.1 to 5 Sec. Resistor 2 CDF-38-70002
0.1 to 10 Sec. CDF-38-70003
0.1 to 10 Sec. CDD-38-30003
24VDC 0.6 to 60 Sec. Knob 1 CDD-38-30004
1.8 to 180 Sec. CDD-38-30005
48VDC 0.6 to 60 Sec. Knob 1 CDD-38-40002
0.1 to 1 Sec. CDD-38-60004
110VDC 0.1 to 10 Sec. Knob 1 CDD-38-60001
0.6 to 60 Sec. CDD-38-60002
1.8 to 180 Sec. CDD-38-60003
Delay on Release Models
Voltage Time Adjustment Wiring Dia. Part Number
0.1 to 1 Sec. CDB-38-70016
0.1 to 5 Sec. CDB-38-70091
120VAC 0.1 to 10 Sec. Knob 3 CDB-38-70014
0.3 to 30 Sec. CDB-38-70092
0.6 to 60 Sec. CDB-38-70012
1.8 to 180 Sec. CDB-38-70015
120VAC 1 Sec. Fixed 3 CDA-38-70025
12VDC 180 Sec. Fixed 3 CDC-38-20026
0.1 to 10 Sec. CDD-38-30014
24VDC 0.6 to 60 Sec. Knob 3 CDD-38-30012
1.8 to 180 Sec. CDD-38-30008