User's Guide

ZBAMB2070 MOBILE HANDHELD DEACTIVATOR 8200-0958-05, REV. A
INSTALLATION AND USER GUIDE
4 of 5
Replacing the Battery
To replace the battery, see your loss
prevention manager or IT specialist.
WARNING: Risk of explosion if
the battery is replaced with an
incorrect size and type.
WARNING: Recycle or dispose
used batteries according to local
or state requirements.
DO NOT mutilate the battery or
expose it to flame.
Before recycling or disposing,
insulate exposed battery wires
with electrical tape.
1. Remove the screw and battery cover
from the bottom of the deactivator.
2. Remove the battery and disconnect it.
3. Plug in the new battery, bend wires as
shown, and seat it in the battery
compartment. Install the battery cover
and secure it with the screw. DO NOT
over tighten.
Bend wires
as shown.
Bar code
label
must
be face up.