Install Guide
Table Of Contents
- AMS-9030 Controller
- _
- About this Guide
- Controller Overview
- Installation Requirements
- Mounting the Controller
- Connecting Antennas
- Connecting Remote Alarms
- Connecting External Devices to Controller Relays
- Connecting Noise Canceling Antennas
- Connecting Multiple 9030 Controllers
- Connecting a Service Laptop
- Connecting a SyncLink Device
- Connecting an Ultra*Link Device
- Connecting Power to the Controller
- Specifications
- Declarations
Preliminary
AMS-9030 CONTROLLER 8200-0344-02, REV. 0
INSTALLATION GUIDE
9 of 16
Figure 5. Controller antenna pinouts
P13
Pedestal A XCVR
P14 Pedestal A Com - 9040
P15 Pedestal A Com - Plus
P16 Pedestal B XCVR
P17
Pedestal B Com - 9040
P18 Pedestal B Com - Plus
P22
Pedestal A Rx only
1 Ground
2 RS485 B Low
3 RS485 B High
4 +15V Alarm
5 Shield
1 Ground
2 RS485 A Low
3 RS485 A High
4 +15V Alarm
5 Shield
1 Antenna A Audio +
2 Antenna A Audio Return
3 Antenna A +5V/12V Lamp
4 RS485 A Low
5 Ground
6 Antenna A RS232 Receive
7 Antenna A RS232 Transmit
8 RS485 A High
9 +15V
10 Shield
1 Antenna A Bottom
2 Antenna A Bottom Return
3 Antenna A Top Return
4 Antenna A Top
5 Shield
1 A Bottom Receive
2 A Bottom Receive Return
3 A Top Receive Return
4 A Top Receive
5 Shield
1 Antenna B Bottom
2 Antenna B Bottom Return
3 Antenna B Top Return
4 Antenna B Top
5 Shield
1 Antenna B Audio +
2 Antenna B Audio Return
3 Antenna B +5V/12V Lamp
4 RS485 B Low
5 Ground
6 Antenna B RS232 Receive
7 Antenna B RS232 Transmit
8 RS485 B High
9 +15V
10 Shield
P23
Pedestal B Rx only
P25
P26
P27
P28
Reserved for future use
Reserved for future use
1 B Bottom Receive
2 B Bottom Receive Return
3 B Top Receive Return
4 B Top Receive
5 Shield