User's Manual

Specifications
Electrical
Power Supply
Primary input ............................100-120Vac or
200-240Vac @ 50–60Hz
Primary power fuse...................5A, 250V, slo-blow,
hi-breaking
Current draw.............................4.0Arms @ 120Vac
Input power...............................<400W
Transmitter
Operating frequency .................58kHz (±200Hz)
(ZE9040)
68kHz (±200Hz)
(ZE9040-68K)
Transmit burst duration.............1.6ms
Transmit current maximum.......16A peak
Burst Repetition Rate:
Based on 50Hz ac ....................75Hz or 37.5Hz
Based on 60Hz ac ....................90Hz or 45Hz
Receiver
Center frequency......................58kHz (ZE9040)
68kHz (ZE9040-68K)
Receive coil resistance.............1.6 ohms (±5%)
Alarm
Alarm relay output.....................DPDT contacts
Contact switching current .........1.0A max.
Contact switching voltage.........28V max.
Lamp/Audio duration.................1–30 sec.
(1 sec. increments)
Environmental
Ambient temperature................ 0°C to 50°C
(32°F to 122°F)
Relative humidity...................... 0 to 90%
non-condensing
Mechanical
Length......................................50.8cm (20in)
Width with bracket....................43.4cm (17.1in)
Width without bracket............... 32.2cm (14.3in)
Height....................................... 15cm (5.9in)
Weight......................................7.3kg (16.1lbs.)
AMS-9040 CONTROLLER 8200-0367-02, REV. D
INSTALLATION AND SERVICE GUIDE
20 of 22