User's Manual

Preliminary
Declarations
TYPE: AMS-9050
Regulatory Compliance
EMC...............................47 CFR, Part 15
EN 61000-3-2
EN 61000-3-3
ETSI EN 300 330-2
ETSI EN 301 489-3
ETSI EN 301 489-1
RSS-310
Safety ............................UL 60950-1
CSA C22.2 No 60950-1
EN 60950-1
FCC COMPLIANCE: This equipment complies
with Part 15 of the FCC rules for intentional
radiators and Class A digital devices when installed
and used in accordance with the instruction
manual. Following these rules provides reasonable
protection against harmful interference from
equipment operated in a commercial area. This
equipment should not be installed in a residential
area as it can radiate radio frequency energy that
could interfere with radio communications, a
situation the user would have to fix at their own
expense.
EQUIPMENT MODIFICATION CAUTION:
Equipment changes or modifications not expressly
approved by Sensormatic Electronics Corporation,
the party responsible for FCC compliance, could
void the user's authority to operate the equipment
and could create a hazardous condition.
Other Declarations
WARRANTY DISCLAIMER: Sensormatic
Electronics Corporation makes no representation
or warranty with respect to the contents hereof and
specifically disclaims any implied warranties of
merchantability or fitness for any particular
purpose. Further, Sensormatic Electronics
Corporation reserves the right to revise this
publication and make changes from time to time in
the content hereof without obligation of
Sensormatic Electronics Corporation to notify any
person of such revision or changes.
LIMITED RIGHTS NOTICE: For units of the
Department of Defense, all documentation and
manuals were developed at private expense and
no part of it was developed using Government
Funds. The restrictions governing the use and
disclosure of technical data marked with this
legend are set forth in the definition of “limited
rights” in paragraph (a) (15) of the clause of
DFARS 252.227.7013. Unpublished - rights
reserved under the Copyright Laws of the United
States.
TRADEMARK NOTICE: Sensormatic is a
registered trademark of Sensormatic Electronics
Corporation. Other product names mentioned
herein may be trademarks or registered
trademarks of Sensormatic or other companies.
No part of this guide may be reproduced in any
form without written permission from Sensormatic
Electronics Corporation.
MDR 1/2006
AMC-7000 INTEGRATED METAL Foil DETECTION 8200-2609-01, REV. 3a
INSTALLATION GUIDE
16 OF 31