User's Manual
Table Of Contents
- AMS-9050 Controller
- Contents
- To the Installer
- About the Product
- Installation Features
- Setup Features
- Service Features
- Basic Operation and Setup
- Device Connections
- Installation Features
- Service Features
- - The service configurator displays the operating current for each antenna. Operating current is 15A peak for all countries.
- - The service configurator displays ambient temperature within the controller.
- - The hardware supports software with a remote command to reset the system.
- - Hardware within the controller protects it from runaway software.
- Installation Requirements
- Controller Installation
- Troubleshooting
- Fuse Replacement
- Specifications
- Declarations
- AMC-7000 Integrated Metal Foil Detection
- About this Guide
- About the Product
- Installation
- Specifications
- Declarations
Preliminary
Figure 3. Photograph of connections on Metal Foil Detection board and AMS-9050 Controller
P5 P14 P8 P4 P3 P2 P1
P2
(WIRED SYNC)
P64
(DIGITAL REM.
ALARM)
P97
(ALARMS B)
P92
(ALARMS A)
P93
(ALARMS C)
P58
(TX A)
P88
(TX C)
* Dashed lines above indicate connectors that are connected by cable.
AMC-7000 INTEGRATED METAL Foil DETECTION 8200-2609-01, REV. 3a
INSTALLATION GUIDE
22 OF 31