User's Manual
Table Of Contents
- AMS-9050 Controller
- Contents
- To the Installer
- About the Product
- Installation Features
- Setup Features
- Service Features
- Basic Operation and Setup
- Device Connections
- Installation Features
- Service Features
- - The service configurator displays the operating current for each antenna. Operating current is 15A peak for all countries.
- - The service configurator displays ambient temperature within the controller.
- - The hardware supports software with a remote command to reset the system.
- - Hardware within the controller protects it from runaway software.
- Installation Requirements
- Controller Installation
- Troubleshooting
- Fuse Replacement
- Specifications
- Declarations
- AMC-7000 Integrated Metal Foil Detection
- About this Guide
- About the Product
- Installation
- Specifications
- Declarations
Device Connections Device Connections
RS-232 SERVICE (J2)
Pin 1 - Rx
Pin 2 - Tx
Pin 3 - Ground
Pin 4 - Ground
AC IN
(120Vac/
240Vac)
System
Status LED
RS-485 NETWORK (P8)
Pin 1 - Black
Pin 2 - Red
Pin 3 - X (Shield)
WIRED Tx SYNC (P2)
Pin 1 - Black (Tx Burst High)
Pin 2 - Red (Tx Burst Low)
Pin 3 - Green (Arm High)
Pin 4 - White (Arm Low)
Pin 5 - 'X' (Shield)
RMT ALARM 1 (P64)
Pin 1 - Orange
Pin 2 - Violet
Pin 3 - X (Shield)
RMT ALARM 2 (P63)
Pin 1 - Orange
Pin 2 - Violet
Pin 3 - X (Shield)
RELAYS (P54)
Pin 1 - Common 1
Pin 2 - NC 1
Pin 3 - NO 1
Pin 4 - ‘X’ (shield)
Pin 5 - Common 2
Pin 6 - NC 2
Pin 7 - NO 2
Pin 8 - ‘X’ (shield)
Tx A TRANSMIT ANTENNA (P58)
Pin 1 - Black (Figure-8 return)
Pin 2 - Red (Antenna A2)
Pin 3 - Silver (Shield)
Pin 4 - Green (Aiding return)
Pin 5 - White (Antenna A1)
Tx B TRANSMIT ANTENNA (P59)
Pin 1 - Black (Figure-8 return)
Pin 2 - Red (Antenna B2)
Pin 3 - Silver (Shield)
Pin 4 - Green (Aiding return)
Pin 5 - White (Antenna B1)
Tx C TRANSMIT ANTENNA (P88)
Pin 1 - Black (Figure-8 return)
Pin 2 - Red (Antenna C2)
Pin 3 - Silver (Shield)
Pin 4 - Green (Aiding return)
Pin 5 - White (Antenna C1)
Tx D TRANSMIT ANTENNA (P91)
Pin 1 - Black (Figure-8 return)
Pin 2 - Red (Antenna D2)
Pin 3 - Silver (Shield)
Pin 4 - Green (Aiding return)
Pin 5 - White (Antenna D1)
PEDESTAL ALARM C (P93)
Pin 1 - White with an 'X' (Shield)
Pin 2 - Yellow (Audio 3)
Pin 3 - Orange (Alarm 3)
Pin 4 - Blue (N/A)
Pin 5 - Brown (12V)
Pin 6 - Black (PED485_LO)
Pin 7 - Red (PED485_HI)
Pin 8 - Green (TX_INHIBIT 1)
PEDESTAL ALARM D (P100)
Pin 1 - White with an 'X' (Shield)
Pin 2 - Yellow (Audio 4)
Pin 3 - Orange (Alarm 4)
Pin 4 - Blue (N/A)
Pin 5 - Brown (12V)
Pin 6 - Black (PED485_LO)
Pin 7 - Red (PED485_HI)
Pin 8 - Green (TX_INHIBIT 1)
Rx C RECEIVE ANT (P99)
Pin 1 - Black (Ant C1)
Pin 2 - Red (Ant C1 return)
Pin 3 - Green (Ant C2)
Pin 4 - Gray or White (Ant C2 return)
Pin 5 - Violet / 'X' (Shield)
Rx D RECEIVE ANT (P103)
Pin 1 - Black (Ant D1)
Pin 2 - Red (Ant D1 return)
Pin 3 - Green (Ant D2)
Pin 4 - Gray or White (Ant D2 return)
Pin 5 - Violet / 'X' (Shield)
PEDESTAL ALARM A (P92)
Pin 1 - White with an 'X' (Shield)
Pin 2 - Yellow (Audio 1)
Pin 3 - Orange (Alarm 1B)
Pin 4 - Blue (Alarm 1A)
Pin 5 - Brown (12V)
Pin 6 - Black (PED485_LO)
Pin 7 - Red (PED485_HI)
Pin 8 - Green (TX_INHIBIT 1)
PEDESTAL ALARM B (P97)
Pin 1 - White with an 'X' (Shield)
Pin 2 - Yellow (Audio 2)
Pin 3 - Orange (Alarm 2B)
Pin 4 - Blue (Alarm 2A)
Pin 5 - Brown (12V)
Pin 6 - Black (PED485_LO)
Pin 7 - Red (PED485_HI)
Pin 8 - Green (TX_INHIBIT 1)
Rx A RECEIVE ANTENNA (P98)
Pin 1 - Black (Ant A1)
Pin 2 - Red (Ant A1 return)
Pin 3 - Green (Ant A2)
Pin 4 - Gray or White (Ant A2 return)
Pin 5 - Violet / 'X' (Shield)
Rx B RECEIVE ANTENNA (P101)
Pin 1 - Black (Ant B1)
Pin 2 - Red (Ant B1 return)
Pin 3 - Green (Ant B2)
Pin 4 - Gray or White (Ant B2 return)
Pin 5 - Violet / 'X' (Shield)
AMS-9050 CONTROLLER 8200-0537-02, REV. B
INSTALLATION AND SERVICE GUIDE
3 of 31