User's Manual

BIS-4170 IVS PEOPLE COUNTER 8200-2702-01, REV. 4A
INSTALLATION AND PLANNING GUIDE
14 of 23
2. For Video to the DVR, plug the pigtail connector of the DVR video cable to connectors E1 and E2 inside
the IVS Device.
3. Attach the bottom shell to the top shell. Tighten both screws securely.
4. Once the PoE injector into a 24-hour outlet, the IVS device will begin its boot up process. This process
takes about 40 seconds, where the Power/Status LED on the PoE module momentarily turns yellow (stand
by), then green indicating that the PoE has successfully identified the IVS as a PoE compliant device.