User's Manual

BIS-4170 IVS PEOPLE COUNTER 8200-2702-01, REV. 4A
INSTALLATION AND PLANNING GUIDE
15 of 23
Verification Test
1. Check out the entire ‘IVS Engineering Test Tool Setup’ folder
from StarTeam. Locate the ‘IVS Engineering Test Tool’ icon
on the desktop of your laptop.
The Test Tool is used to perform initial installation of the IVS
and can be used to verify count information obtained from the
IVS Device. Communications will occur via one of two
communications media: Ethernet or Bluetooth (selectable via
a pull down menu).
The IVS Engineering Test Tool can:
• Display the static video image “seen” by the IVS Device
• Be used to draw count lines
• Transmit count lines to the DSP
• Be used to set and maintain time
• Display and storing count data.
2. On your laptop, click the icon to open the IVS Engineering
Test Tool.