User's Manual

1-4 8000-2803-01, Rev. 1/A Introduction
The number of RF passage antennas required for
a particular door/portal depend on the size of the
opening being protected and whether the RF
reader is to recognize assets. The following
configurations are recommended:
Door/Portal
Width
Tags Only Badges
Only
Optimum
Performance
Up to
.9m (3ft)
1 Model A
and 1
Model B
1 Model A
2 Model A and
2 Model B
.9m (3ft) –
1.8m (6ft)
2 Model A
and 2
Model B
2 Model A 2 Model A and
2 Model B
RF Proximity Antenna Configurations
RF proximity antennas are not available at this
time.
Specifications
Electrical
Transponder
Type: ..................................Passive, TIRIS® ,
read/write
...........................................(64-bit usable data
max.)
Style: ..................................Asset tag or access
control badge
Antennas
Input Requirements: ...........16V nominal @ 4A
peak
Type: ..................................Tunable passage
antenna
RF Controller
Input Requirements: ...........15V nominal @ 8A
peak
Power Fuse: .......................5A, 250V manufactured
by Semko or equivalent
Outputs:..............................10V @ 10 mA,
12V open circuit
Transmitter/Receiver
Operating Frequency: ........134.2kHz
Transmit/Receive Cycle: ....70ms
Transmit Time: ...................50ms
Receive Time: ....................20ms
Receiver Data Format: .......52-bit
Recognized b
y
Host as One
RF Reader