User's Manual

C•CURE Watch Installation and Service Guide 1-5
External Power Supply for RF Controller
North America:......Requires a nominal 15Vdc @
8A peak Class 2 linear power
supply. (Not investigated by
UL).
EU: This product runs on 15Vdc
linear power supply. In the EU,
it is intended to be powered
from a Limited Power Source.
A limited power source is a
certified source of SELV, and if
inherently limited, with 8A
maximum output current, and
a maximum of 100VA
available; or if not inherently
limited, fused with a maximum
value of 3.3 Amps, meeting
section 2.11 of IEC950, and a
maximum of 250VA available.
The power supply can be
obtained through Sensormatic
or through another source
where the provider can furnish
the verification. This is
required to assure electrical
safety in the product. (Not
investigated by UL).
Inputs and Outputs
System Inputs: ................... 2 auxiliary inputs
System Outputs: ................ 2 auxiliary outputs: 10V
@ 10mA / 12V open
circuit
1 RS-422 sync output
1 RS-485
communications
interface
Environmental
Ambient Temperature: ....... 0°C to 50°C
(32°F to 122°F)
Storage Temperature:........ –30°C to 70°C
(–22°F to 158°F)
Relative Humidity:.............. 0 to 90% non-
condensing
Regulatory
Emissions: ..........................FCC Part 15
ETS 300330
ETS 300683
Safety: ................................UL 294
External Power Supply:......Listed Class 2
EN60950 (CE) LPS
UL 294