User's Manual

4-8 8000-2803-01, Rev. 1/A8000-2803-01, Rev. 1/A8000-2803-01, Rev. 1/A8000-2803-01, Rev. 1/A Installation
Connect Inputs and Outputs
The RF controller provides connections for two
inputs and two outputs. These inputs and outputs
must be associated with the opening/portal
connected to the Antenna 1 connector.
NL
Inputs must be supervised. All inputs and outputs
are configured from the host system. Inputs must
be wired as shown below.
The output connector provides internal power for
both outputs. These must be wired in series.
Outputs provide 10 milliamps at 10V and 12V open
circuit.
Input 2
Output 2
Output 1
Return 1
+12Vdc
Input 1
Output 2
Output 1
Return 2
Supervised,
Normally Closed
Supervised,
Normally Open
Output
2
Output
1
+12Vdc
Circuit protected
outside dotted line.
Circuit protected
outside dotted line.
1K
1K
1K
1K
P19
P20