User Manual

10 SETUP AND SERVICE GUIDE

DIGITAL MICROWAVE SYSTEM 915

8000-0395-02, REV. B

Declarations

Regulatory Compliance

EMC: ................................ 47 CFR, Part 15

Safety: .............................. UL1950 (UL)

Can/CSA C22.2 No.

950

EN60950 (CE)

FCC COMPLIANCE: This equipment complies with Part

15 of the FCC rules for intentional radiators and Class A

digital devices when installed and used in accordance with the

instruction manual. Following these rules provides reasonable

protection against harmful interference from equipment

operated in a commercial area. This equipment should not be

installed in a residential area as it can radiate radio frequency

energy that could interfere with radio communications, a

situation the user would have to fix at their own expense.

EQUIPMENT MODIFICATION CAUTION: Equipment

changes or modifications not expressly approved by

Sensormatic Electronics Corporation, the party responsible for

FCC compliance, could void the user's authority to operate the

equipment and could create a hazardous condition.

Other Declarations

WARRANTY DISCLAIMER: Sensormatic Electronics

Corporation makes no representation or warranty with respect

to the contents hereof and specifically disclaims any implied

warranties of merchantability or fitness for any particular

purpose. Further, Sensormatic Electronics Corporation

reserves the right to revise this publication and make changes

from time to time in the content hereof without obligation of

Sensormatic Electronics Corporation to notify any person of

such revision or changes.

LIMITED RIGHTS NOTICE: For units of the Department

of Defense, all documentation and manuals were developed at

private expense and no part of it was developed using

Government Funds. The restrictions governing the use and

disclosure of technical data marked with this legend are set

forth in the definition of "limited rights" in paragraph (a) (15)

of the clause of DFARS 252.227.7013. Unpublished - rights