User's Manual
Table Of Contents
- Installation and Configuration Guide
- Preface
- Overview
- apC/8X Physical Requirements
- Mounting the apC/8X
- Connecting the apC/8X to a Host
- apC/8X Panel Setup
- Equipment Specifications
- Testing the apC/8X Installation
- Calculating Maximum Wiring Lengths
- Dialup Modem Settings
- Packing and Shipping apC/8X Boards
- Templates and Technical Drawings
- Index
Configuring OEM Modems
D-2 apC/8X Technical Manual
Configuring OEM Modems
OEM modems work for dialup and leased line communications on C•CURE
800/8000 hosts.
Configuring Modems for Use with Dialup Lines
Table D.1: apC/8X Switch Settings for Dialup Modem
Switch Status Description
1 ON Clears memory on the panel, after communications, should
switch to OFF.
2 OFF Amber LEDs on readers.
3 OFF Must be Off
4 ON Enable dialup.
5 OFF 9600 baud.
6 OFF 9600 baud.
7 OFF 9600 baud.
8 ON Sets parity to NONE.
Table D.2: OEM Modem Switch Settings for Dialup
Switch Host apC/8X
#1 UP DOWN
#2 UP UP
#3 DOWN DOWN
#4 UP UP
#5 DOWN DOWN
#6 UP UP
#7 DOWN DOWN
#8 DOWN DOWN