User's Manual

Preface
apC/8X Technical Manual xiii
UL Listing
The apC/8X controller is UL 294 and UL 1076 Listed. If the apC/8X has a
Lien Industries power supply installed, the unit is inherently power limited so
no additional excess current protection is needed. If the apC/8X has a Wall
Industries (Sinpro) power supply installed, the unit is not inherently
power-limited and requires the supplied DC harness with 5A in-line fuses.
This unit must be installed in a secure location.
FCC Class A Digital Device Limitations
The apC/8X controller has been tested and found to comply with the limits
for a Class A digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference when the device is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications. Operation of this equipment
in a residential area is likely to cause harmful interference in which case the
user will be required to correct the interference at his own expense.
Caution: Equipment changes or modifications not expressly
approved by Software House, the party responsible for FCC
compliance, could void the user’s authority to operate the
equipment, and could create a hazardous condition.