User's Manual
Table Of Contents
- Installation and Configuration Guide
- Preface
- Overview
- apC/8X Physical Requirements
- Mounting the apC/8X
- Connecting the apC/8X to a Host
- apC/8X Panel Setup
- Equipment Specifications
- Testing the apC/8X Installation
- Calculating Maximum Wiring Lengths
- Dialup Modem Settings
- Packing and Shipping apC/8X Boards
- Templates and Technical Drawings
- Index
Preface
apC/8X Technical Manual xvii
Power Supply Information
The apc/8X controller is provided without an uninterruptible power supply
(UPS). The Advanced Power Supply (apS) is a UL603-Listed Burglar Alarm
Power Supply. This unit will provide nominal 12 VDC output at 3.5 Amps in
excess of four hours when using the supplied, single 17 AH battery. An
additional 17 AH battery can be installed to provide 8 hours of battery-backed
power.
In order to maintain UL regulatory approval for this product, either the apS
or another Class-2 (Power Limited) UL 603 or UL 294 Listed Power Supply
must be used with a battery appropriate for the required standby time.