User's Manual
Table Of Contents
- Installation and Configuration Guide
- Preface
- Overview
- apC/8X Physical Requirements
- Mounting the apC/8X
- Connecting the apC/8X to a Host
- apC/8X Panel Setup
- Equipment Specifications
- Testing the apC/8X Installation
- Calculating Maximum Wiring Lengths
- Dialup Modem Settings
- Packing and Shipping apC/8X Boards
- Templates and Technical Drawings
- Index
apC/8X Hardware Components
3-2 apC/8X Technical Manual
apC/8X Hardware Components
The apC/8X panel ships with the following components.
Caution: Before handling and installing any component, follow
these precautions:
– Discharge your body’s static electricity charge by touching a
grounded surface
– Wear a grounding strap and work on a grounded
static protection mat.
– Do not slide a component over any surface.
– Limit your movements during the installation process to reduce
static electricity.
Table 3.1: apC/8X Hardware Components
Qty Description
1 PCB, door illuminator (pre-installed)
2 push button tamper switches (pre-installed)
1 power supply assembly (optional)
1 chassis ground cable assembly (pre-installed)
1 door illuminator cable assembly (pre-installed)
1 apC/8X cabinet enclosure
1 apC/8X board (pre-installed)
1 installation map label (pre installed on apC/8X cabinet door)
1 apC/8X label (pre-installed)
1 power limit label (pre-installed)
1 FCC/UL/CE label (pre-installed)