User's Manual
Table Of Contents
- Installation and Configuration Guide
- Preface
- Overview
- apC/8X Physical Requirements
- Mounting the apC/8X
- Connecting the apC/8X to a Host
- apC/8X Panel Setup
- Equipment Specifications
- Testing the apC/8X Installation
- Calculating Maximum Wiring Lengths
- Dialup Modem Settings
- Packing and Shipping apC/8X Boards
- Templates and Technical Drawings
- Index
Testing the apC/8X Installation
apC/8X Technical Manual B-11
apC Configuration Display
Figure B.4: apC Configuration Display
Table B.5 shows the meaning of the variables.
1. Select F3 to refresh the data; it is not dynamic.
2. Select F2 to return to the Configuration menu.
Table B.5: Configuration Variables and States
Configuration Variable State
Firmware version 8.7W
RAM Size Number of RAM chips and their size
ROM Checksums Not used with Flash ROM
Cabinet tamper Status Secure or alert
Power fault status Secure or alert
Host communication status Online or Offline
Address switches SW4 and SW5