Fire Panel Internet Interface Specification Sheet

Features
SafeLINC Fire Panel Internet Interface (FPII)
enables investigation of fire alarm control panel
status using the familiar interface of an Internet
browser:
x Provides single user access for up to 20 different user
accounts (access is one-at-a-time)
x Compatible with Internet Explorer (version 5.0
or higher)**
x Intuitive menu screens
x UL Listed to Standard 864
Security access features:
x Generic initial login screen
x Multiple user accounts and passwords similar to the host
control panel
x Programmable lockout to prevent excessive login
attempts by unauthorized users
Automatic or scheduled e-mail feature provides
selectable notification to user accounts:
x Built-in e-mail feature will notify user accounts of
individually selected status changes either automatically
or as scheduled
x Information can be alarm, supervisory, trouble;
or TrueAlarm
®
Sensor Service and Status Reports
x Compatible pagers, cell phones, or Personal Digital
Assistants can receive direct e-mail messages or
messages forwarded from a user account
x Personal Digital Assistants (PDAs) can be synchronized
to user account e-mail messages for message portability
Compatible with fire alarm control panel model
Series 4100U, 4100, 4120, and 4020 (see
mounting notes on page 3)
Available information:
x Alarm, Priority 2 Alarm, Supervisory, and Trouble
counts and status messages
x Detailed point information accessible similar to that
available at the panel
x TrueAlarm
®
sensor status including both status reports
and service reports
x Alarm and Trouble log information
On-board service PC port provides convenient
installation setup and diagnostics
* This product has been approved by the California State Fire Marshal (CSFM) pursuant to
Section 13144.1 of the California Health and Safety Code. See CSFM Listing
7300-0026:312 for allowable values and/or conditions concerning material presented in
this document. It is subject to re-examination, revision, and possible cancellation. This
product was not MEA (NYC) approved as of document revision date. FM approval is not
applicable for this product type. Additional listings may be applicable; contact your local
Simplex product supplier for the latest status. Listings and approvals under Simplex
Time Recorder Co. are the property of Tyco Safety Products Westminster.
** Internet Explorer is a product of Microsoft® Corporation.
Fire Control
Remote PC
with Internet
browser
SafeLINC Internet
Interface main screen
Fire alarm control panel
SafeLINC
FPII module
Remote status
summary
Local Internet
connection
Local network
connection
Intranet/Internet Service
Provider Network
SafeLINC FPII System Connection Drawing
Description
Fire Alarm Control Panel System Information.
Simplex
®
fire alarm control panels monitor their
connected devices and gather system information to
describe the status of the protected buildings. This
information is available at the panel and via accessory
devices such as remote terminals or dial-in modems, all
requiring special equipment connections.
Secure Internet Access. The SafeLINC Internet
interface provides an alternative access to system
information using the familiar interface of a standard
Internet browser. A remotely located fire professional can
use this access to analyze control panel status during
non-alarm conditions and can also use this information to
assist local fire responders during alarm conditions.
(NOTE: Secure access requires proper installation behind
network firewalls consistent with local network security
requirements.)
Fire Control Panel Accessories
UL, ULC Listed; SafeLINC™ Fire Panel Internet Interface for
CSFM Approved* Model Series 4100U, 4100, 4120, and 4020
S4100-0028-2 9/2003