Installation Guide

4
5. CAMERA STATUS & LED INDICATORS
Power / Mode Status LED Indicators
Power On
Press and hold the power button until you see the blue LED light
ashes and then release.
Blue LED light ashes twice.
Power O
Press and hold the power button for more than 2 seconds and then
release.
Red LED light ashes once.
Reset password
While the Backup Camera is on, press and hold the power button for
more than 5 seconds and then release.
Blue LED light ashes 5 times.
Low Voltage Protection Red LED ashes continuously.
Please charge, pair, and test the Wireless Backup Camera with the TYPE S Drive App before you install
on your vehicle.
NOTE: The camera should come with at least 90% battery charge. We recommend to charge for 5-6
hours prior to use to ensure maximum performance.
6. BEFORE YOU INSTALL
CHARGING THE WIRELESS BACKUP CAMERA
Fold back camera power port plug and insert
included charging cable. Most AC USB wall
adapters will work with the USB charging cable.