Emergency Function Emergency alarm only use to transfer emergency situations, you can release a emergency call at anytime and anywhere . Even the walk talkie Is busy In transferring or receiving Radio support 3 types of emergency call: » Emergency Call » Call follow emergency alarm » A voice follow emergency alert Moreover: alarm has the following types: » Prohibit: radio can not send emergency call but can receive . * Local + Remote: An emergency call with voice or notice .
Emergency Alarm This function called speech signal and allows to send emergency alarm and will trigger on another radio . 1. Press per-programmed power on key. 2. Screen shows sending emergency call, exchange |D with other walk talkie .LED Indicator changes to red and emergency call mark will down on the home screen 3. When receive the emergency call, the radio issues the emergency call and LED indicator changes to green , screen shows emergency call send out successfully .
. Screen will show emergency call successful, then speak clearly When under activated emergency microphone, radio transfer automatically without press [PTT] key before duration within limits 4. During transfer , LED Indicator becomes red and emergency alarm mark will show on screen. 5. After the time of emergency microphone, radio stop to transmit .
Menu operation Character Input Users can use the 3 x4 alphanumeric keypad to access the radio’s function. When you're Using the keypad to input a user alias or text messages, walkies-talkie input contains three modes:1, English letters mouthiness input mode, 3,digital input mode. When using the keypad input ID, you can only select the digital mode. English Typing: Users have to press a button several times for getting some characters.
Chinese Typing Number 1 Is a button of punctuation s selection Input Number 2-8 are correspond Pinyin Input, when user Input something, the screen shows the pinyin Input Interface, the first line of interface shows the contents inputted by user, second line of interface shows the Chinese characters what users input.
5. When Screen displays radio dictation: < user alias indicating the ongoing of radio detraction. The LED indicator light is red. 8. Waiting for confirmation 7. If the target radio Is active In the system , then It makes a prompt sound, screen will show that target two way radio has responded shortly. Or if the target radio in the system is not active, then it makes a prompt sound, screen will show that target two way radio has no answer shortly. 8. Two way radio rectums to user alias or ID screen.
» Call type » Call the alias » Call the ID Note: you can add, delete, edit Contacts person In the digital address hook{contacts) Group Call With Contacts 1. Press [ [3] to enter Menu 2. Press contacts, then press choose, entrees arrange In alphabetical order. Press [3 or&3] te required calling group's alias or ID. . Holding the radio and let it in a vertical position and keep mouth 1 to 2 inches (25th 5.0 om) with radio. 5. Press [PTT] to start calling, the LED tums red.
Note: If you released) button when you are setting up the call, and when it will exit and return 1o the previous screen without any remind. Radio can be reprogrammed executive two way radio are testing before establishing single call. If the target radio did not reply, you will hear a short beep, and screen shows the other radios did not reply. Two way radio rectum to menu before starting the radios around test Call Log Your radio can record all the recent dialed, received, and not answered call.
4. Press [@9 or €B] key to missed call's alias or ID, and then press [ £3] key to choose 5. Press or £3] key to delete the entries then press [ (3 ] key to select if you need to delete this entry. 6.
4 Abashing cursor appears, using the keyboard to input messages, press [ €9 ] key to nova to the left one, press [ €&3 ] button to the right one, when editing area have content; press the [ ED ] key fo delete any useless character, otherwise when editing area without content to return to the higher level menu. 5. After writing the text, press choose to send or save.
massage has been sent. Or if the message can't send, send out a high tons hint sound, screen display message sent failures, failure if the SMS messages, intercom chance to rectum 1o the re transmission selection screen. Send Quick Text With A Key 4. Press Preprogrammaed,single bond calls to a predefined alias or ID sends a prefabricated text massages. 2. The screen displays a text message: < user/group name or ID > call, te confirm text me-: sages were being sent 3.
Editing messages Choosing edit to edit message before you edit Note: if you have a subject line {receive text messages from from email program), you can't edit the subject line. 1. Press [3 or EB] key to edit, then press [ C3 | key to choose 2.
41. Check the messages, press [ C3 ] key again 2. Press the [9 ori] key fo resend, then press [ (3) ] key to chooses. 3. The screen displays: < user/group name or ID > call, confirm that It Is preparing to send the same message to the same target radio 4. If the messages sent successfully, issued a prompt sound, and the screen display text message has been sent. Or if the message was not sent, issued a high tone hint sound, and screen displays text message sent failure.
ICONS and text messages When receive tact messages, you can choose the following options: ‘a reading? # Reading Later » delete Note: when the radio shows tip on the screen, please press (PT, two way will exit and to establish a single call or text message screen group call. Check the SMS 4. Press the [ or €B] key to Read, And then press [3 | key to choose 2. the selected text messages on the inbox opened, if the message is from the email pro gr: am, It will appear a subject line. 3.
Reply The Inbox SMS Use the menu function: 1. Press [ © ] button fo enter the Menu. 2. Press the [@ or €3] key to message, and then press [ [3 ] key to choose 3. Press [or 3] to the inbox, and then press [ © ] key to choose 4. Press the [9 or] key to the SMS, and then press [ {3 ] key to choose. If the messages are from the email program, it will appear a subject line. Press again [ 3] button fo enter sub menu. . Press reply, and then press [ 3 ] key to choose. .
When you select the "inbox® but not one of them text messages, the screen will display the list is empty, if the keyboard is open at this time, will be a low tone hint sound. Encryption if you enable this feature, which Is beneficial to prevent other users on the channel by using the method of software encryption for unauthorized eavesdropping. The launch of signaling and user identification part encrypted.
Radio Enable Use menu function: 4. Press [ £3] key to enter the menu mode. 2. Press or] key to Contacts, and then press [ [3 ] key to select, entries are In alphabetical order. 3. Press [or &3] key to the required alias or ID, and press [ (3 ] key to select Or press [@@or &3] key to Manual Dial, then press twice [ 3] key to enter a user alias or ID, and press [ [3 ] key to select. 4. Press [@9 or&] key to radio enable, and then press [ (3 ] key to select. 5.
