User Manual TH-9000D TH-9000DU To customers (Only IC UHF Version) Thank you very much for using two-way radios. This product has a newly developed function menu and humanism operation design, making it easy to use. It will meet your requirement by the compact size and reasonable price. TYT Electronics Co.,Ltd.
Thank you for choosing TYT mobile transceiver, TYT always provides high quality products, and this transceiver is no exception. As you learn how to use this transceiver, you will find that TYT is pursuing "user friendliness". For example, each time you change the menu no. in Menu mode, you will see a text message on the display lets you know what you are configuring. Though friendly design for user, this transceiver is technically complicated and some features may be new to you.
Channel mode CONTENTS New and Innovative Features Supplied Accessories/Optional Accessories 01 02-03 Supplied Accessories 02 Optional Accessories 03 Initial Installation 04-13 Mobile Installation 04-05 DC Power Cable Connection 05-09 Power Supply Voltage Display 09-10 Antenna Connection 10-11 Accessories Connections 11-13 Getting Acquainted 14-18 Front panel 14-15 Rear panel 16 Display Microphone 16-17 18 Adjusting Channel Through Selector Knob Receiving Transmitting 23 Channel
Current Voltage Enquiry 28 Voice Prompt Auto-Dialer Setup 29 TOT (Time-out timer) 29 APO (Auto power off) Transmitting Edited DTMF Tones in the Auto-dialer Memory General Setting Frequency Channel Step Setup 30-45 30 DTMF Transmitting Time Squelch Level Setup 39 39-40 40 40-41 41 DTMF, DTMF ANI, 2Tone or 5Tone Signaling 30-31 Scan Stop Time Setup Sending 2-Tone Call 31-32 LCD Backlight 42 Sending 5-Tone Call 32 Background Light Color 42 41-42 Sending DTMF call 32-33 Pilot Frequency
Scan Skip 48 Frequency/Channel Scan 48 Busy Channel Lockout 49 Reverse TX/RX TOT (Time-out timer) CTCSS/DCS Encode and Decode Talk Around Voice Prompt LCD Backlight 49-50 50 50-51 51 51-52 52 Long-distance Anti-theft Alarm 53-54 Cable Clone 54-55 Programmin Software Installing and Starting (in windows XP system) 56-57 Maintenance 58-59 Default Setting after Resetting(VHF) 58 Default Setting after Resetting(UHF) 58 Trouble Shooting 59 Specifications 60-61 Attached Chart 62-66 50 gro
Supplied Accessories/Optional Accessories Optional Accessories Supplied Accessories After carefully unpacking the transceiver, identify the items listed in the table below. We suggest you keep the box and packaging.
Initial Installation Determine the appropriate angle of the transceiver, using the 3 screw hole positions on Mobile installation the side of the mounting bracket. To install the transceiver, select a safe, convenient location inside your vehicle that minimizes danger to your passengers and yourself while the vehicle is in motion. Consider installing the unit at an appropriate position so that knees or legs will not strike it during sudden braking of your vehicle.
3. In order to avoid the risk of short circuit, please cut down connection with negative (-) of optional (For Cigar-Plug connection) cable. Connect one of the cables between the ACC battery, then connect with radio. terminal or a Cigar-Plug that operates with the vehicle ignition or ACC switch on the vehicle 4. Confirm the correct polarity of the connections, then attach the power cable to the battery and EXT POWER jack on the rear side of the unit.
Fixed Station Operation Replacing Fuses Ineed a separate 13.8V DC power supply (not included) , power supply as optional If the fuse blows, determine the cause, then correct the problem. After the problem is accessories. Please contact local dealer to require. resolved, replace the fuse. If newly installed fuses continue to blow, disconnect the power The recommended current capacity of your power supply is 12A. cable and contact your autho- rized TYT dealer or an authorized TYT servi-cecenter for 1.
The transceiver will return to its normal operation when the power is switched ON or repeat above operation. Important: The range of displayed voltage is only from 7V to16V DC, because the displayed value is estimated, please use a voltmeter when a more precise reading is desired. Antenna Connection Before operating, install an efficient, well-tuned antenna.
PC Connecting To utilize the optional TH-9000D software, you must first connect the transceiver to your PC then using an optional programming cable PC50 (via Data socket ). Error SP-01 Please use TH-9000D software for programming. Ground NOTE: Ask your dealer about purchasing a Programming Cable PC50. Microphone For voice communications, connect a microphone equipped with an 8-pin modular plug into the modular socket on the front of the main unit. Press firmyly on the plug until the locking tab clicks.
Press Getting Acquainted Front panel 3 Basic Functions NO. 14 11 4 5 7 6 8 1 KEY NO. 2 9 12 key until icon appears then press the following key. KEY FUNCTION 4 F Confirms the selective functions and exit 5 P1 Voice compander 6 P2 Store memory channel 7 P3 Delete memory channal 8 P4 Keypad lock 10 FUNCTION 1 Pow(Power) Power on/Off 2 VOL Adjust Volume Key 3 Main Dial Change frequency, memory channel and scan direction etc.
Rear panel NO. 1 2 3 KEY 1 SQL Squelch level. 2 M In channel mode. Indicates the channel number in channel mode. 3 NO. 1 KEY FUNCTION 2 Ext.Speaker Terminal Terminal for connecting optional cable for use with ignition key On/Off function. The radio will auto power on when car is driving. The radio will auto power off when car stops. Terminal for optional external speaker SP-01. 3 Antenna Connector Connection for 50*antenna. Ext.
Microphone 2 Display Mode 1 1. Display Mode: Except setting as "CH" mode, others considered as transceiver mode. Under this mode,press 3 4 5 6 7 TH-9000D P3 key to switch between Channel mode and VFO mode . A. Frequency + Channel mode: When set display as"FR",it enters into Frequency+Channel mode, new setting of channel operation and shortcut operation can be temporarily used by (Pic 1) user. Once the radio is turned off or switched to another NO.
Basic Operations Switching The Power On/Off PWR KEY according to the option selected during installation Press the switch or turn the ignition key to ACC (speed up) or ON (startup) position to power on radio . Press the keyfor 1s or turn the ignition key to OFF position to turn off. Min Max Volume Volume Adjusting The Volume Turn the VOL knob clockwise to increase the audio level, counterclockwise to decrease. NOTE: During communication, volume can be adjusted more accuratiy.
NOTE: 5k, 6.25k, 8.33K,10k, 12.5k, 20k, 25k, 30k and 50k total nine step size available for Please hold the microphone approximately 2.5-5.0cm from your lips, and then speak into this radio. the microphone in your normal speaking voice to get best timbre. Receiving NOTE:Press and hold [PTT] key, LED lights RED and power intensity showed in screen indicates it is transmitting, release to receive.
Channel Delete 1. In VFO mode,presst 1. Under channel mode, turn selector knob to select channel which you want to delete. 2. Press P4 key and 2. Turn selector knob or press Microphone [ UP key together, current channel will be deleted and emitted 3. Press any key except Shortcut Operations Channel Scan Squelch Off and key to exit. In channel mode, this function is designed to monitor signal in every channel. key programmed as Squelch Off to monitor the weak signal. 1.
knob or press Microphone's [ UP / DOWN ] to select desired DCS encode and decode. 4. CTCSS:62.5-254.1, Total 51groups; DCS:000N-777I total 1024 groups. N is positive code, Voice Compander Compander function will decrease the background noise and enhance 15 audio clarity, especially in long range communication. is inverse code. 5. Press any key except , and P5 keys to return into standby status. 1.
5. Turn selector knob or Mic's [ UP / DOWN ] key to change offset frequency, offset frequency changed as per stepping. 6. Press any key except and Auto-Dialer Setup This will automatically transmit pre-programmed and stored DTMF tones. And they are P2 key to exit into standby. often used to remote control electronic devices or AUTOPATCH phone systems available NOTE: Under channel mode,this operation can be temporarily used by user. on some repeater.
General Setting 1. Press and hold 1. Press and hold setting menu. 2. Press P1 or key for over 2s to enter general setting menu. P2 to select the desired function option. 3. Turn selector knob to select the desired setup. 4. Press to confirm and exit. P5 NOTE: In Profession transceiver mode,the functions from No.1 to No.17 will be auto-hidden. Frequency Channel Step Setup Only in frequency (VFO) mode, this function is valid.
5. Press kdy to confirm and exit. P5 4. Total:16groups,00-16,Default:00. NOTE: Content and name of 2TONE will be edited by programming software. 5. Press This radio only query edited group or name.If there is corresponding name for 2TONE,this Signaling Combination setup operation will display 2TONE corresponding name. Sending 5-Tone Call 1. Press and hold 2.Press P1 / This function is to improve the level of protecting the radio against receiving irrelative signal. 1.
NOTE: This setting will be set together with adding optional signaling and CTCSS/DCS. Disable this function,it is invalid to press PTT,current channel Band-width Selection only works in RX mode. Select suitable bandwidth in accordance with different local conditions. 1. Press and hold 1. Press and hold menu. key for over 2s to enter general setting 2. Press menu. 2. Press P1 / P2 key to choose No.08 menu, LCD displays / P1 key for over 2s to enter general setting P2 key to choose No.
but dis-matching CTCSS/DCS.press [PTT] to emit error voice prompt and back to receiving status. Talk Around By Talk Around function,you can directly communicate with other radios in your group OFF: Busy channel lockout is disabled.It can transmit in any receiving status. in case the repeater is not activated or when you are out of the repeater range. The transceiver 4. Press will transmit by RX frequency with its CTCSS/DCS signaling. kdy to confirm and exit. P5 Editing Channel NAME 1.
8 Groups of Scrambler (Encryption) An analog voice inversion scrambler can be equipped as optionals.This special audio process Voice Prompt The prompting tone provides confirmation of entry, error status or malfunctions of the can offer a more confidential communication.Other radios at same frequency will receive transceiver. You can enable or disable this function. only disordered noises. 1. Press and hold 1. Press and hold 2. Press / P1 key for over 2s to enter general setting menu.
OFF:Disable TOT 4. Press P5 4. Press key to confirm and exit. Default:3. APO (Auto power off) Once APO is activated, the radio will be automatically switched off when the pre-set timer is running to end. 1. Press and hold 2. Press P1 / Squelch level Setup Setting the radio to a tight squelch level, you can avoid unwanted signals or noise, but you may not receive a weak signal. Therefore, it will be better for you to select the normal squelch level key for over 2s to enter general setting menu.
CO:it pauses once scanning a matching signal,signal disappeared 2. Press then resume scan. displays"TB--1750". SE:It stops once scanning a matching signal. 3. Turn selector knob to select the desired pilot frequency. 4. Press 1750HZ:Pilot frequency1750HZ key to confirm the selection and exit.Default:TO. P5 LCD Backlight P1 / P2 key to choose No.26 menu, LCD 2100HZ:Pilot frequency 2100HZ 1. Press and hold 2. Press P1 / P2 key for over 2s to enter general setting menu.
Power On Password Setup Enable this function,you have to insert a matching PIN to enter into normal status when radio is turned on. If your radio seems to be malfunctioning, resetting the microprocessor may solve the problem. When performing the reset, you may lose memory data and stored information. 1. Press and hold key for over 2s to enter general setting menu. 2. Press Factory Default Back up or write down important data before performing the reset. 1. Press and hold P1 / P2 key to choose No.
Function Setup By Microphone Keypad Microphone Operation squelch off :In standby, press UP when DOWN key, the squelch is disabled icon , flashed in LCD,Press squelch and the again to enable icon disappears. Switches between VFO and channel mode PTT Numeric Keys Lock DTMF ON/OFF Speaker TH-9000DU In standby,press key to switch between channel mode and Frequency mode (VFO). Short Calling In standby,press to transmit the selected DTMF/2TONE/5TONE in current channel.
When first bit of Exa byte in frequency displays "D",it indicates DTMF function enable. Busy Channel Lockout BCLO is to disable transmitting while RX signal is received. Once the channel is busy When first bit of Exa byte in frequency displays "T",it indicates and you press PTT, the radio will beep as warning and get back to receiving. 2Tone function enable. 1. In standby,press When first bit of Exa byte in frequency displays " ",it indicates 2.
ON:Enable Frequency Reverse 4. Press OFF:Disable Frequency Reverse NOTE:This function can be temporarily used in Channel mode. Once the radio is turned off 3. Press number keys to confirm and exit. or switched to another channel, the temporary setting will be erased and back to initial NOTE: This function can be temporarily used in Channel mode . Once the radio is turned settings. off or switched to another channel, the temporary setting will be erased and back to initial Talk Around settings.
BEEP--OF :turn off voice prompt Long-distance Anti-theft Alarm BEEP--ON :turn on voice prompt This function is mainly use for simple anti-theft alarm device in vehicles. When the 3. Press number key to exit and store. transceiver be removed in an improper manner,the transceiver will emit and transmit alarming LCD Backlight and background voice to system and other transceiver of the same frequency. 1. In standby status,press 2. Press [ UP , then press LCD displays"LAMP- XX" .
4. When the alarm cable or is removed from the DATA jack or cut by improper sequence, the 3. Press master unit's [PTT] key, LCD displays "SD XXX", "XXX" indicates data volume in alarm function enable and will alarm as programmed. In alarming,the transceiver will stop transmitting. Slave unit displays "LD XXX", "XXX" indicates received data volume. When alarm once receiving a matching signal. And alarm again when a matching signal disappeared.
Programming Software Installing and Starting (in windows XP system) connects with different USB port. Double click "TYT TH-9000D", then follow the You shall install software before connecting the USB cable line. Switch on transceiver installing instruction. Install USB Cable Driver Programme P1 before writing frequency.
Trouble Shooting Maintenance Default Setting after Resetting(UHF) Problem Possible Causes and Potential Solutions TH-9000D DCS encode and decode - (a) Power is on, nothing appears + and - polarities of power connection are reversed. VFO frequency 445.00MHz DCS code 023N on Display. Connect red lead to plus terminal and black lead to Memory channel 0-199 - - - Offset direction - Key-lock setting OFF Offset frequency 600KHz TOT OFF Channel step 12.
Receiver (ETSI EN 300 086 standard testing) Specifications General Frequency Range Tx: 144-148 ,Rx:136-174MHz (FCC 150MHz Version) Tx: 222-225 ,Rx:220-260MHz (FCC 220MHz Version) Tx: 420-450 ,Rx:400-490MHz (FCC 450MHz Version) Wide band Narrow band Sensitivity (12dB Sinad) *0.25µV *0.
1024 groups DCS Code. Attached Chart 50 groups CTCSS Tone Frequency(Hz) 000 001 002 003 004 005 006 007 67.0 79.7 94.8 110.9 131.8 156.7 171.3 186.2 203.5 229.1 010 011 012 013 014 015 016 017 69.3 82.5 97.4 114.8 136.5 159.8 173.8 189.9 206.5 233.6 020 021 022 023 024 025 026 027 031 032 033 034 035 036 037 71.9 85.4 100.0 118.8 141.3 162.2 177.3 192.8 210.7 241.8 030 74.4 88.5 103.5 123.0 146.2 165.5 179.9 196.6 218.1 250.
64 230 231 232 233 234 235 236 237 500 501 502 503 504 505 506 507 240 241 242 243 244 245 246 247 510 511 512 513 514 515 516 517 250 251 252 253 254 255 256 257 520 521 522 523 524 525 526 527 260 261 262 263 264 265 266 267 530 531 532 533 534 535 536 537 270 271 272 273 274 275 276 277 540 541 542 543 544 545 546 547 300 301 302 303 304 305 306 307 550 551 552 553 554 555 556 557 310 311 312 313 314 315
750 751 752 753 754 755 756 757 760 761 762 763 764 765 766 767 770 771 772 773 774 775 776 777 NOTE: N is positive code, is negative code, total: 232groups. FCC Warning IC Warning Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.