User's Manual

P1 P2

1. Press and hold key for over 2s to enter into general

setting menu.

2.Press / to choose No 2 menu,LCD displays"T-OFF" .

3. Turn selector knob to select the desired setup.

"DTMF'': the channel will be mute by a DTMF signal. The speaker won't be open until

receiving a correspondent DTMF signal. Hold "PTT" then press or press

directly to transmit the pre-stored DTMF signaling.

"2TONE": the channel will be mute by a 2-Tone signal. The

speaker won't be open until receiving a correspondent 2-Tone

signal.Hold "PTT" then press or press directly to

transmit the pre- stored 2-Tone signaling.

"5Tone": the channel will be mute by a 5-Tone signal. The

Speaker won't be open until receiving a correspondent 5-Tone signal. hold "PTT"then

then press directly to transmit the pre-stored 5-Tone signaling.

Sending 2-Tone Call

1. Press and hold key for over 2s to enter general setting menu.

2.Press / key to choose No.03 menu, LCD displays

"2TON XX","XX"indicates the group in the list.

3. Turn selector knob to select the desired sending 2TONE group,

Press PTT to transmit selected group.

4. Total:32groups,00-31,Default:00.

P2P1

General Setting

P1 P2

1. Press and hold key for over 2s to enter general setting menu.

2. Press or to select the desired function option.

3. Turn selector knob to select the desired setup.

4. Press to confirm and exit.

NOTE: In Profession transceiver mode,the functions from No.1 to No.17 will be auto-hidden.

Frequency Channel Step Setup

Only in frequency (VFO) mode, this function is valid. Turn selector knob to select frequency

or frequency scanning which is restricted by frequency step size.

1. Press and hold key for over 2s to enter general setting menu.

2. Press / key to choose No.01 menu, LCD displays "STP--125"

3. Turn selector knob to select the desired frequency channel step. Channel step: 5K,

6.25K,8.33K,10K,12.5K,20K,25K,30K and 50K, total 9 kinds.

4. Press key to confirm and exit

NOTE: This function is auto-hidden in channel mode.

DTMF, DTMF ANI, 2Tone or 5Tone Signaling

DTMF/5Tone/2Tone signalling function as similarily as CTCSS/DCS. Without receiving

correspondent tone signalling, the speaker will remain mute. DTMF and 5Tone signalling

can be applied for other advanced features such as ANI, PTT ID, group call, remotely stun,

remotely kill, waken,...etc. The signalling edition must be done through programming

software. Please refer to it in the programming software to know how to operate these features.

P1 P2