User's Manual

DC power cabcle

Alarm cable

Steering-wheel etc.

Battery

Alarm cable

DATA

PWR

Long-distance Anti-theft Alarm

This function is mainly use for simple anti-theft alarm device in vehicles. When the

transceiver be removed in an improper manner,the transceiver will emit and transmit alarming

and background voice to system and other transceiver of the same frequency.

Connect DC power cable with car battery.

1. Connect the optional alarm cable to the data jack on the front panel as shown. Secure

the other end of the cable to an object that stays fixed in vehicle.(Note: if alarm cable is not

enough long, you can choose optional alarm cable to extend).

2. When transceiver power off by press key ,the long-distance anti-theft alarm enable.

3. Note:The long-distance anti-theft alarm only available when transceiver power off .

BEEP--OF :turn off voice prompt

BEEP--ON :turn on voice prompt

3. Press number key to exit and store.

LCD Backlight

1. In standby status,press , then press LCD displays"LAMP- XX" .

2. Press [ / ] to select desired backlight brightness(1-32 levels).

3. Press number keys to confirm and exit.

DOWN