User's Manual
but dis-matching CTCSS/DCS.press [PTT] to emit error voice prompt and back to receiving
status.
OFF: Busy channel lockout is disabled.It can transmit in any receiving status.
4. Press kdy to confirm and exit.
Editing Channel NAME
1. Press and hold key for over 2s to enter general setting menu.
2. Press / key to choose No.11 menu, LCD displays
cursor and flashing.
3. Turn selector knob to select the desired letter,press key to
confirm selected letter and enter into next edition,Press to return forward edition.
4. After edition,press key to exit.
NOTE: In Frequency (VFO) mode ,this function will be auto-hidden.
Reverse TX/RX
TX frequency turns to RX frequency & RX frequency changes to TX frequency. The
signaling will also be reversed if CTCSS/DCS signaling exited in this channel.
1. Press and hold key for over 2s to enter general setting menu
2. Press / key to choose No.12 menu, LCD displays "REV--OF".
3. Turn selector knob to select the desired setting.
ON:Enable Frequency Reverse
OFF:Disable Frequency Reverse.
4. After edition,press key to exit.
36
P
5
P5
P1 P2
P5
P3
P4
P1 P2
37
Talk Around
By Talk Around function,you can directly communicate with other radios in your group
in case the repeater is not activated or when you are out of the repeater range. The transceiver
will transmit by RX frequency with its CTCSS/DCS signaling.
1. Press and hold key for over 2s to enter general setting
menu.
2. Press / key to choose No.13 menu, LCD displays
"TALK--OF".
3. Turn selector knob to select the desired setting.
ON:Enable Talk Around
OFF:Disable Talk Around
4. After edition,press key to exit.
Voice Compander
Enable this function to reduce background noise and enhance audio clarity, especially
in long range communication.
1. Press and hold key for over 2s to enter general setting menu
11. Press / key to choose No.14 menu, LCD displays "COMP--OFF".
3. Turn selector knob to select the desired setting.
ON:Enable compander
OFF:Disable compander
4. Press key to confirm and exit. Default: OFF
P5
P1 P2
P5
P1 P2