Users Manual

our TYT Electronics Co., Ltd. radio generators RF electromagnetic during transmit mode.
This radio is designed for and classified as"Occupational Use Only",meaning it must be
used only during the course of employment by individuals aware of the hazards,and the
ways To Minimize Such hazards. This radio is NOT intended for use by the"General Population" in an
uncontrolled environment. This radio has been tested and complies with the FCC RF exposure limits for
"Occupational Use Only".Inaddition, our TYT Electronics Co., Ltd radio complies with the following
Standards and Guidelines with regard to RF energy and electromagnetic energy levels and evaluation
of such levels for exposure to humans:
--IEEE Std. 1528:2013 and KDB447498, Evaluating Compliance with FCC Guidelines for Human
Exposure to Radio Frequency Electromagnetic Fields.
--American National Standards Institute (C95.1-1992), IEEE Standard for Safety Levels with Respect to
Human Exposure to Radio Frequency Electromagnetic Fields, 3 kHz to 300 GHz.
--American National Standards Institute (C95.3-1992), IEEE Recommended Practice for the Measurement
of Potentially Hazardous Electromagnetic Fields- RF and Microwave.
The information listed above provides the user with the information needed to make him or
her aware of RF exposure, and what to do to asÿsure that this radio operates with the FCC
RF exposure limits of this radio.
Electromagnetic Interference/Compatibility
During transmissions, TYT Electronics Co., Ltd. radio generates RF energy that can possibly
cause interference with other devices or systems. To avoid such interference, turn off the radio in
areas where signs are posted to do so. DO NOT operate the transmitter in areas that are sensitive to
electromagnetic radiation such as hospitals, aircraft, and blasting sites.
Occupational/Controlled Use
The radio transmitter is used in situations in which persons are exposed as consequence of their
Attention:
This radio complieswith IEEE and ICNIRP exposure limits for occupational/controlled RF exposure
emvironment at operating duty factors of up to 50% and is authorized by the FCC for occupational use only.
This product is compliance to FCC RF Exposure requirements and refers to FCC website
information include SAR Values.
https://apps.fcc.gov/oetcf/eas/reports/GenericSearch.cfm search for FCC ID:PODTH-UVF9 to gain further
employment provided those persons are fully aware of the potential for exposure and can exercise control
over their exposure.
An appropriate warning lable is affixed to all units. In order to comply with RF exposure requirements, a
minimum distance of 2.5cm must be maintained when held-to-face, and body-worn operations are restricted
to the approved original acessories (belt clip). Do not use this device when antenna shows obvious damages
Saf ety T raining I nf ormation