Instructions / Assembly

8
www.tytusgrills.com
ASSEMBLE THE GRILL
Before Grill Assembly
• Make sure that you have assistance from another person to handle the grill box and other large, heavy parts.
• Open the lid of the shipping box, and remove the top sheet of cardboard and packing materials. Lay the cardboard
sheet on the floor and use it as a work surface to protect the floor and grill parts from scratches.
• You may slice the box’s front corners with a utility knife to lay open the box’s front panel. This lets you raise the lid and
remove the components packed inside, making it easier to lift.
• Use the “
Package Contents” (page 7) and “Part Diagrams and Lists” (page 50) to ensure all items are included and
free of damage.
• Do not assemble or operate the grill if it appears damaged. If there are damaged or missing parts when you unpack
the shipping box or you have questions during the assembly process, call [phone] or email
[e-mail]
.
• The installation must conform with local codes or, in the absence of local codes, with the National Fuel Gas Code,
ANSI Z21.58-2018/CSA 1.6-2018.
Step 1: Lift off the Grill Box
1) Unlock the four latches on the sides of the grill.
2) With another person, grasp the handholds on the sides of the grill box, then lift it straight up and set it to the side.
!
TIP: Lift with
these handholds.
Tytus-Grills_19-0238_MAN_V1_ENG.fm Page 8 Friday, August 9, 2019 10:44 AM